ChinaDroneRequest a quote →

EMAX Skyline32 Flight Controller (Acro V1.2)

The EMAX Skyline32 Flight Controller (Acro V1.2) is a compact multirotor controller with a 32-bit ARM processor, gyro and compass. It supports Cleanflight and Baseflight, multiple flight modes, and standard or CPPM receiver inputs. Supplied with two RC breakout cables, it includes Micro-USB configuration access and supports OSD, OLED and Spektrum Satellite receivers.

EMAXDrone flight controller
Weight
4.8 g

Get a free quote

Product overview

The EMAX Skyline32 Flight Controller (Acro V1.2) supports quad-, tri- and hex-rotor configurations, with Manual, Angle, Horizon, heading hold and head-free flight modes. Standard and CPPM (PPM SUM) RC inputs provide receiver connection options, while battery voltage monitoring includes a low-voltage alarm. V1.2 supports OSD, OLED and Spektrum Satellite receivers. Position hold and Go home functions use optional GPS. The controller supports NAZE32 firmware, including Cleanflight and Baseflight, and comes loaded with Baseflight and the Baseflight-Configurator GUI.

The board measures 35mm x 35 mm x 5 mm with 30.5mm mounting and weighs 4.8g without wires. Its 32-bit ARM microprocessor runs at 3.3V / 72MHZ, supported by high-quality electronic components and high-precision SMT assembly. Wire-to-board connectors and rear 3.3V and 5V soldering pads provide connection points. A gyro and compass are complemented by reserved expansion positions for an accelerometer and barometer. Micro-USB enables firmware flashing and parameter adjustment. The package contains one SKYLINE32 Acro V1.2 and two RC breakout cables. MultiWii-based firmware cannot be compiled through Arduino or other AVR tools.

Flight control & navigation

Specifications

EMAX Skyline32 Flight Controller (Acro V1.2) specifications
SpecificationValue & conditions
ProductEMAX Skyline32 Flight Controller (Acro V1.2)
Product code0103001003
Dimensions and mounting35mm x 35 mm x 5 mm; 30.5mm mounting
Weight4.8gWithout wires.
Processor32-bit ARM microprocessor running at 3.3V / 72MHZ
ConstructionHigh-quality electronic components and high-precision SMT
ConnectorsWire-to-board connectors
Peripheral supportOSD, Spektrum Satellite receiver and OLED supportAcro V1.2.
Soldering pads3.3V & 5V soldering pads on the backAcro V1.2.
Sensors and expansion provisionsGyro and compass, with reserved expansion positions for an accelerometer and barometer
Flight modesManual, Angle, Horizon, heading hold and head-free modes
Multirotor supportQuad-, tri- and hex-rotor configurations and various multirotors
RC inputsStandard and CPPM (PPM SUM)
Battery monitoringBattery voltage monitoring and low-voltage alarm
Micro-USB functionsFirmware flashing and parameter adjustment
GPS functionsGPS position hold and Go homeOptional GPS.
Firmware compatibilityNAZE32 firmware compatibility, including Cleanflight and Baseflight
Loaded software and configuration interfaceBaseflight and Baseflight-Configurator GUI
Included equipment1x SKYLINE32 Acro V1.2; 2x RC breakout cable
Compilation limitationThe processor is not Atmel AVR; compilation through Arduino or other AVR tools is not supported.Firmware and configuration based on MultiWii software.

Related guides