ChinaDroneRequest a quote →

EMAX Skyline32+OSD Flight Controller (Acro)

The EMAX Skyline32+OSD Flight Controller (Acro) integrates multirotor control and an onboard OSD for FPV builds. It provides direct camera and video transmitter connections, transmitter-based PID adjustment, a 32-bit ARM processor and 2MB Blackbox storage. The compact board is supplied with connection cables, nylon mounting hardware and assorted header pins.

EMAXDrone flight controller
Weight
4.8 g

Get a free quote

Product overview

The EMAX Skyline32+OSD Flight Controller (Acro) combines multirotor flight control with an integrated OSD for FPV builds. An FPV camera and video transmitter connect directly to the board, and a switch turns the OSD on or off. Preinstalled MW_OSD enables PID adjustments through transmitter stick commands and the OSD menu without connecting a computer. The controller supports quad, tri, hex and octo configurations, with Manual, Angle, Horizon, Head-Holding and Head-free flight modes. GPS Hold and Return-To-Home require a GPS module.

The board measures 35mm x 35 mm x 5 mm with 30.5mm mounting and weighs 4.8g without wires. Its construction uses high precision SMT and wire-to-board micro connectors, with a built-in gyro and accelerometer. A 32-bit ARM microprocessor runs at 3.3v / 72MHz, and Blackbox recording has 2MB of storage. RC inputs support PPM, non-inverted SBUS and PWM; PPM connects through Channel 1 of RC_IN (UART2), while SBUS connects through Channel 4 of the same port.

The controller runs Cleanflight, Betaflight or Baseflight and is compatible with NAZE32 firmware, including Cleanflight and Baseflight. It comes loaded with Baseflight and Baseflight-Configurator GUI. Firmware updates use Micro-USB; keep the OSD switch OFF while using this connection. Supplied equipment comprises one SKYLINE32+OSD (Acro), two RC breakout cables, one vBat cable, one buzzer cable, two UART cables, four nylon standoffs and nuts, and an assortment of straight and 90-degree header pins. With MultiWii-based firmware and configuration, compilation through Arduino or other AVR tools is not supported.

Flight control & navigation

Specifications

EMAX Skyline32+OSD Flight Controller (Acro) specifications
SpecificationValue & conditions
ProductEMAX Skyline32+OSD Flight Controller (Acro)
Product code0103001018
Dimensions and mounting35mm x 35 mm x 5 mm (30.5mm Mounting)
Weight4.8gWithout wires.
Integrated OSDFlight controller with onboard OSD for FPV builds.
OSD switchingSwitchable ON/OFF OSD.
FPV connectionsDirect connections for an FPV camera and video transmitter.
PID adjustmentPID adjustment through the OSD without a computer.With preinstalled MW_OSD, using transmitter stick commands and the OSD menu.
PPM connectionPPM via Channel 1 in the RC_IN port (UART2).
SBUS connectionSBUS via Channel 4 in the RC_IN port (UART2).
RC input formatsPPM, non-inverted SBUS and PWM.
Firmware optionsCleanflight, Betaflight or Baseflight.
NAZE32 firmware compatibilityCompatible with NAZE32 firmware, including Cleanflight and Baseflight.
Supplied softwareLoaded with Baseflight and Baseflight-Configurator GUI.
ConnectorsWire-to-board micro connectors.
Gyro and accelerometerBuilt-in gyro and accelerometer.
Blackbox storageBlackbox ready with 2MB of storable data.
ConstructionElectronic components assembled using high precision SMT.
Processor32-bit ARM microprocessor running at 3.3v / 72MHz.
Flight modesManual, Angle, Horizon, Head-Holding and Head-free modes; Altitude-Hold is available in the Advanced version.Acro version.
Supported multirotorsQuad, tri, hex, octo and various multirotors.
Firmware updatingFirmware flashing through Micro-USB.Leave the OSD switch OFF when using Micro-USB.
GPS functionsGPS Hold and Return-To-Home supported.GPS module needed.
Included equipment1x SKYLINE32+OSD (Acro), 2x RC breakout cable, 1x vBat cable, 1x buzzer cable, 2x UART cables, 4x nylon standoffs and nuts, and 1x header pin assortment (straight and 90 degree).
Development tool limitationThe processor is not Atmel AVR; compilation via Arduino or other AVR tools is not supported.With firmware and configuration based on MultiWii software.

Related guides