Product overview
The EMAX Cinehawk Mini 2.5Inch FPV Racing Drone with 2.4G ELRS DJI O3 is a bind-and-fly ducted cinewhoop for indoor fly-throughs, close shots and travel footage. Its installed DJI O3 Air Unit streams HD video with latency as low as 30ms while recording onboard. Recording reaches up to 4K/120fps with current DJI firmware, using 20GB of built-in storage. RockSteady provides in-camera stabilization; switching it off enables gyro recording for Gyroflow processing. D-Cinelike color supports grading.
A carbon-fiber X frame sits within a molded four-duct guard, with the camera and video-system top plate supported on damping balls. The 108mm-wheelbase aircraft measures 156 × 156 × 60mm and weighs approximately 150.5g without a battery in the O3 configuration. Four ECO II 1303.5 4500KV motors drive Avia 2518-3 tri-blade propellers. The F405 20A AIO combines flight control, an 8-bit 4-in-1 ESC rated at 20A continuous and an ExpressLRS 2.4GHz receiver. Approximate flight time is 6–7 minutes with 4S 450–850mAh packs, depending on battery, payload, video system and flying style.
The package supplies the drone with its DJI O3 Air Unit installed, one spare Avia propeller pair, three camera covers and an instruction card for the aircraft and receiver PDF manuals. Radio, goggles, battery, charger and battery strap are not included. Power input is 2–4S LiPo, with a recommended landing voltage of 14.4V on 4S. The separately sold DJI O4 conversion kit fits the Cinehawk Mini 2.5-inch and supplies a printed camera cover, two camera side mounts and an antenna mount; the DJI O4 Air Unit Pro, goggles and battery are excluded from that kit.