Product overview
The EMAX Hawk Apex 5-inch FPV Racing Drone BNF is built for light, efficient racing and flowing lines through the course. Its 210mm frame provides clearance for full 5-inch propellers, combining slim 2.5mm carbon arms with a printed top plate. The frame is stiffened to reduce flex and vibration. ECO II 2004 motors drive red Avia 5030 tri-blade propellers, with 2400KV motors paired with 4S batteries or 1600KV motors paired with 6S batteries. An XT30 connector serves the battery mounted beneath the frame.
An STM32F722 flight controller and 25A 4-in-1 BLHeli_S ESC share a single AIO board, with DShot600 and an EMAX Betaflight race tune. The BNF package includes an installed EMAX ExpressLRS 2.4GHz receiver, configured as CRSF in Betaflight. A RunCam Nano HDZero camera and HDZero Whoop VTX deliver 720p60 digital video with fixed, ultra-low latency. The transmitter offers 25/200mW output and pit mode through an EMAX Nano 5.8GHz U.FL antenna. Video reception requires HDZero goggles or an HDZero VRX; analog, DJI and Walksnail goggles cannot receive the feed.
The BNF box contains one Hawk Apex 5-inch drone with its ExpressLRS receiver, a spare Avia 5030 tri-blade propeller set, spare screws and stickers. Battery, LiPo balance charger, radio transmitter and HDZero goggles or VRX are not included. Use a 4S XT30 LiPo with the 2400KV version or a 6S XT30 LiPo with the 1600KV version, together with an ExpressLRS 2.4GHz transmitter. Weight is about 190g without a battery and exceeds 250g with a flight battery fitted. Replacement propellers, arms and plates are sold separately.