ChinaDroneRequest a quote →

Emax Hawk Apex 5inch FPV Racing Drone PNP

The EMAX Hawk Apex 5inch FPV Racing Drone PNP pairs a lightweight, stiffened frame with ECO II 2004 motors, HDZero 720p60 video and an STM32F722 AIO flight controller. Offered in 4S 2400KV and 6S 1600KV configurations, it is designed for efficient racing flight and comes without a receiver.

EMAXFPV drones
Wheelbase
210 mm; true 5-inch prop clearance
Weight
About 190g
Video transmitter
HDZero Whoop VTX, 25/200mW, plus pit mode

Get a free quote

Product overview

The EMAX Hawk Apex 5inch FPV Racing Drone PNP is built for efficient flight and flowing race lines. Its 210mm frame combines 2.5mm carbon arms with a printed top plate and a stiffened structure to reduce flex and vibration. ECO II 2004 motors drive red Avia 5030 tri-blade propellers: 2400KV motors use a 4S XT30 LiPo, while 1600KV motors use a 6S XT30 LiPo. The battery mounts beneath the frame. Weight is about 190g without a battery, may vary slightly by version, and exceeds 250g with a flight battery fitted.

An STM32F722 flight controller and 25A BLHeli_S 4-in-1 ESC share an AIO board, with DShot600 support and an EMAX Betaflight race tune. The RunCam Nano HDZero camera works with an HDZero Whoop VTX to transmit 720p60 digital video with fixed, ultra-low, consistent latency. VTX settings include 25mW, 200mW and pit mode; power and channel are adjusted through the on-screen HDZero menu. An EMAX Nano 5.8GHz antenna uses a U.FL connection. Video reception requires HDZero goggles or an HDZero VRX; analog, DJI and Walksnail goggles cannot receive the feed.

The PNP package includes one Hawk Apex 5-inch drone without a receiver, a spare Avia 5030 tri-blade propeller set, spare screws and stickers. Fit a receiver that matches your radio. The battery, LiPo balance charger, radio transmitter and HDZero goggles or VRX are not included. Additional props, arms and plates are sold separately. For Betaflight configuration, connect the flight battery before USB because USB power alone does not power the receiver. Remove the propellers whenever the drone is connected to a computer.

Specifications

Emax Hawk Apex 5inch FPV Racing Drone PNP specifications
SpecificationValue & conditions
ProductEMAX Hawk Apex 5inch FPV Racing Drone PNP
Product code0110001133
DesignDesigned for flowing race lines and efficient flight; smaller 2004 motors reduce weight and extend flights while providing less top-end thrust than heavier 2207-class builds.
Wheelbase210mm; true 5-inch prop clearance
WeightAbout 190gWithout battery; weight may vary slightly by version.
Flight weightMore than 250gWith a flight battery fitted.
Frame constructionStiffened frame with 2.5mm carbon arms and a printed top plate
MotorsECO II 2004 2400KV4S version.
MotorsECO II 2004 1600KV6S version.
PropellersAvia 5030 tri-blade, red
Battery requirement4S LiPo, XT302400KV version.
Battery requirement6S LiPo, XT301600KV version.
Battery mountingXT30 connector; battery sits under the frame
Flight controllerSTM32F722 flight controller and 25A 4-in-1 ESC on one AIO board
ESC25A BLHeli_S 4-in-1 ESC, DShot600
FirmwareBetaflight with an EMAX race tune
Camera and digital videoRunCam Nano HDZero camera; 720p60 digital video with fixed, ultra-low, consistent latency
Video transmitterHDZero Whoop VTX, 25/200mW, plus pit mode
VTX antennaEMAX Nano 5.8GHz antenna, U.FL
Video compatibilityRequires HDZero goggles or an HDZero VRX; analog, DJI and Walksnail goggles cannot receive the video
VTX controlPower and channel controlled through the on-screen HDZero VTX menu, opened with a stick command; SmartAudio is not supported
Receiver and radioNo receiver installed; requires your own receiver and matching radioPNP configuration.
Factory tuning battery6S 700mAh pack6S version tuning configuration.
Included equipment1× Hawk Apex 5-inch PNP without receiver, spare Avia 5030 tri-blade propeller set, spare screws and stickersPNP package.
Items not includedBattery, charger, radio transmitter, HDZero goggles or VRX
Charger requirementLiPo balance charger; not included
USB power limitationConnect the flight battery before USB; USB power alone does not power the receiverWhen configuring in Betaflight.
Replacement partsNot crash-proof; replacement props, arms and plates are sold separately

Related guides