ChinaDroneRequest a quote →

Emax Hawk Apex 3.5inch FPV Racing Drone with STM32F722 4IN1 25A ESC HD

The EMAX Hawk Apex 3.5-inch FPV Racing Drone combines a compact carbon X frame, ECO II 2004 3000KV motors and HDZero digital video for technical racing courses. Supplied in PNP or ExpressLRS BNF configurations, it includes an F7 AIO flight controller, an EMAX Betaflight race tune, spare propellers, screws and stickers.

EMAXFPV drones
Wheelbase
162 mm
Weight
167 g
Video transmitter
HDZero Whoop VTX, 25 / 200mW, pit mode

Get a free quote

Product overview

The EMAX Hawk Apex 3.5-inch FPV Racing Drone is built for racing on tight technical tracks and indoor courses. Its compact carbon X frame has a 162mm wheelbase, carbon arms and plates, and a printed red-and-black top plate. The battery mounts beneath the frame through an XT30 connector. ECO II 2004 3000KV brushless motors drive red Avia 3630 tri-blade propellers selected for cornering grip. Weight without a battery is 167g; with a typical flight pack such as a 4S 850mAh, total weight exceeds 250g.

An STM32F722 flight controller shares an AIO board with a 25A BLHeli_S 4-in-1 ESC supporting DShot600, and the drone ships with an EMAX Betaflight race tune. A RunCam Nano HDZero camera and HDZero Whoop VTX deliver 720p60 digital video with fixed, ultra-low latency. The transmitter offers 25 / 200mW output and pit mode, paired with an EMAX Nano 5.8GHz U.FL antenna. Video reception requires HDZero goggles or an HDZero VRX; analog, DJI and Walksnail goggles cannot receive the feed.

Choose PNP to install your own receiver, or ExpressLRS BNF with an EMAX ExpressLRS 2.4GHz receiver already fitted. The BNF version binds to ExpressLRS 2.4GHz transmitters, while PNP requires your own receiver and radio. Each package supplies one Hawk Apex 3.5-inch drone, a spare Avia 3630 tri-blade propeller set, spare screws and stickers. The battery, charger, radio transmitter and HDZero goggles or VRX are not included. VTX power and channel are adjusted through the on-screen HDZero menu; the transmitter does not use SmartAudio.

Specifications

Emax Hawk Apex 3.5inch FPV Racing Drone with STM32F722 4IN1 25A ESC HD specifications
SpecificationValue & conditions
Product typeEMAX Hawk Apex 3.5-inch FPV racing drone
Product code0110001132
Wheelbase162mm
Weight167gWithout battery.
MotorsECO II 2004 3000KV
PropellersAvia 3630 tri-blade (3.6 × 3.0 × 3), red
Flight controllerSTM32F722 AIO with 4-in-1 25A BLHeli_S ESC
ESC protocolDShot600
CameraRunCam Nano HDZero, 720p60
Video transmitterHDZero Whoop VTX, 25 / 200mW, pit mode
VTX antennaEMAX Nano antenna, 5.8GHz, U.FL
ReceiverBNF: EMAX ExpressLRS 2.4GHz; PNP: noneBNF and PNP configurations respectively.
FirmwareBetaflight, EMAX race tune
Frame constructionCarbon arms and plates with a printed red-and-black top plate
Battery mounting and connectorXT30 connector; battery mounted under the frame
Digital video latencyFixed, ultra-low, consistent latency
Radio requirementExpressLRS 2.4GHz transmitterBNF configuration.
Radio requirementUser-supplied receiver and radioPNP configuration.
Video reception requirementRequires HDZero goggles or an HDZero VRX; analog, DJI and Walksnail goggles cannot receive the video
VTX controlsPower and channel controlled through the on-screen HDZero VTX menu opened by a stick command; no SmartAudio
Supplied drone1× Hawk Apex 3.5-inch drone without receiverPNP configuration.
Supplied drone1× Hawk Apex 3.5-inch drone with EMAX ExpressLRS 2.4GHz receiverExpressLRS BNF configuration.
Included accessoriesSpare Avia 3630 tri-blade propeller set, spare screws and stickersBoth PNP and ExpressLRS BNF configurations.
Items not includedBattery, charger, radio transmitter, HDZero goggles or VRX
Weight with flight packMore than 250gWith a typical flight pack such as a 4S 850mAh fitted.

Related guides