ChinaDroneRequest a quote →
CFCTEK Carbon Fiber FPV Drone Frame (X-Type), showing the assembled chassis and four armsCFCTEK Carbon Fiber FPV Drone Frame (X-Type), showing the assembled chassis and four arms

CFCTEK Carbon Fiber FPV Drone Frame (X-Type)

The CFCTEK Carbon Fiber FPV Drone Frame (X-Type) is a 220mm true X-design chassis for FPV racing, freestyle aerial photography and long-range exploration UAVs. Built from full 3K twill carbon fiber, the 88g frame supports 5-6 inch propellers and includes M3 titanium alloy screws and brass threaded inserts.

CFCTEKDrone frame
Weight
88 g
Material
Full 3K twill carbon fiber
Wheelbase
220 mm

Get a free quote

Product overview

The CFCTEK Carbon Fiber FPV Drone Frame (X-Type) provides a chassis for FPV racing drone builds, freestyle aerial photography and long-range exploration UAVs. Its true X-design combines a 220mm wheelbase with four 6mm-wide arms. Full 3K twill carbon fiber construction uses 1.5mm-thick arms and a 2.0mm centerplate, with the entire frame weighing 88g. The frame accommodates 5-6 inch propellers, bringing these dimensions together in a chassis intended for racing and aerial photography applications.

The layer-stack design supports mounting for three PCBs: a flight controller, ESC and HD module. Camera tilt adjusts through 0°-60° to accommodate different viewing angles, and the frame supports 4K transmission without interference. Peak vibration is below 0.01g when tested at 6000 RPM. Supplied hardware includes M3 titanium alloy screws and brass threaded inserts, complementing the carbon fiber structure and its provisions for stacked electronics.

Propellers & airframes

Specifications

CFCTEK Carbon Fiber FPV Drone Frame (X-Type) specifications
SpecificationValue & conditions
ProductCFCTEK Carbon Fiber FPV Drone Frame (X-Type)
MaterialFull 3K twill carbon fiber
Arm thickness1.5mm
Centerplate thickness2.0mm
Frame geometryTrue X-design
Wheelbase220mm
Arm configuration4x 6mm-wide arms
Weight88gEntire frame.
PCB stack mountingSupports 3x PCB stack mounting for a flight controller, ESC and HD module
Peak vibrationLess than 0.01gTested at 6000 RPM.
Screws and insertsM3 titanium alloy screws and brass threaded insertsIncluded hardware.
Propeller compatibility5-6 inch propellers
Camera tilt adjustment0°-60°
Transmission supportSupports 4K transmission without interference
ApplicationsFPV racing drone builds; freestyle aerial photography; long-range exploration UAVs

Related guides