Product overview
The CFCTEK CNC Machined Carbon Fiber Drone Frame Kit provides components for DIY drone construction in a 5.1-inch format, weighing approximately 131 g. The frame uses 6mm arms, 2.5mm main plates and 3mm faceplates, with 20x20 and 30x30 stack mounts and 20x20 and 25.5x25.5 VTX mounts. Video system options include DJI O4/O3, Walksnail, HDZero, Analog and OpenIPC. T300 carbon may be used for the plates, while the arms require T700. All carbon parts must match the specified thicknesses for assembly and proper strength.
Assembly requires six 20mm and two 23mm standoffs, sixteen M3 press nuts designated 4.7, four 8mm M3 round head screws, five 8mm, two 12mm and five 20mm M3 countersunk head screws, and two 8mm M3 high head screws. Two faceplate designs are available; the standard design is recommended when O4 Pro is not installed or planned. The O4 Pro faceplate has not been sufficiently tested, and its stability is not guaranteed. With digital video transmitters, 3D printed protection for the face, arms and unit is strongly recommended.


