Product overview
The CFCTEK CNC Custom Carbon Fiber Drone Frame is a 5.1-inch drone frame with 20x20 and 30x30 stack mounts and 20x20 and 25.5x25.5 VTX mounts. Video system options include DJI O4/O3, Walksnail, HDZero, Analog and OpenIPC; the O4 Pro faceplate has not yet been sufficiently tested, and its stability is not guaranteed. Construction calls for 6mm arms, 2.5mm main plates and 3mm faceplates. T300 carbon may be used for the plates, while the arms require T700. All carbon parts must match the specified thicknesses to permit assembly and retain the required strength.
Assembly requires six 20mm standoffs, two 23mm standoffs, sixteen M3 press nuts designated 4.7, four 8mm M3 round head screws, five 8mm M3 countersunk head screws, two 12mm M3 countersunk head screws, five 20mm M3 countersunk head screws and two 8mm M3 high head screws. For builds without an O4 Pro or plans to install one, the standard faceplate is recommended for greater strength and reliability. With digital video transmitters, 3D printed protection for the face, arms and unit is strongly recommended. Frame durability and reliability depend on material selection and assembly workmanship.



