Product overview
The BrotherHobby SE 2808 1350KV Motor(CW) is a propulsion component for FPV drone builds. Its physical architecture combines a 12N14P motor configuration with a stator made from 0.2mm Kawasaki silicon steel and a rotor using N52H arc magnets. Both the base casing and bell cap use Al 7075, while the shaft uses SUS420. Japanese NMB bearings are specified as 12X6X4. The motor weighs 58.2g and carries the CW designation.
Integration centers on the motor’s mechanical attachment, propeller interface and electrical configuration. The mounting specification is M3 with a 19X19mm bolt pattern, and the propeller adapter shaft has an M5 thread. Electrical details comprise a 1350KV rating, a specified 6S LiPo battery configuration and 18# AWG wire measuring 25cm in length. This product is an individual motor component; its mounting pattern, shaft thread and battery configuration define concrete requirements for the surrounding propulsion installation.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BrotherHobby SE 2808 1350KV Motor(CW) |
| Product category | SE series FPV drone motor |
| KV | 1350KV |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft material | SUS420 |
| Battery cell count | 6SLiPo battery configuration. |
| Mounting bolt pattern | M3 (19X19mm) |
| Bearings | Japanese NMB 12X6X4 |
| Rotor magnets | N52H arc magnets |
| Weight | 58.2g |
| Wire gauge and length | 18# AWG, 25cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby SE 2808 1350KV Motor(CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
