Product overview
The BrotherHobby DXA 2207.5 Motor (CW) is an FPV drone motor offered in 1750KV and 1920KV versions, with a specified 6S LiPo cell configuration. Its physical construction combines a 12N14P motor configuration with N52H arc rotor magnets and a stator made from 0.15mm Nippon Steel silicon steel. A hollow titanium alloy shaft and Japanese NMB bearings measuring 9x4x4mm form the shaft and bearing assembly, while both the bell cap and base casing use Al 7075.
Integration centers on an M3 bolt pattern measuring 16X16mm and an M5 propeller adapter shaft thread. Electrical leads are specified as 20AWG with a length of 16cm, providing concrete dimensions for wiring layout. The copper wire is described as military grade with a 260 ℃ specification; that figure applies to the wire rather than establishing an overall motor operating temperature. The procurement configuration is the CW motor component, with the two KV options available for selection.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BrotherHobby DXA 2207.5 Motor (CW) |
| KV options | 1750KV/1920KV |
| Motor configuration | 12N14P |
| Cell count | 6SLiPo battery configuration. |
| Rotor magnets | N52H arc magnets |
| Copper wire | 260 ℃ military grade |
| Stator | 0.15mm Nippon Steel silicon steel |
| Shaft | Titanium alloy hollow shaft |
| Bearings | Japanese NMB 9x4x4mm |
| Wire gauge and length | 20AWG, 16cm length |
| Bell cap | Al 7075 |
| Base casing | Al 7075 |
| Propeller adapter shaft thread | M5 |
| Bolt pattern | M3(16X16mm) |
