Product overview
The BrotherHobby Avenger 5210 V5 295KV/365KV Motor(CW) is a drone propulsion motor offered with 295KV and 365KV options. Its physical construction combines an Al 7075 base casing and bell cap with a SUS420 shaft. Internally, it has a 24N28P configuration, a stator specified at 10mm and N52H arc magnets in the rotor. The bearing specification is 16x8x5. Both the base casing and bell cap therefore use the same specified Al 7075 material.
The motor provides an M5 propeller adapter shaft thread and an M4 mounting bolt pattern specified as 30X30mm. Its electrical specification covers 6-12S LiPo battery configurations. Wiring is specified as 16# AWG with a length of 75cm. The motor weighs 241g with 75cm SR wires included in that measurement. This weight applies to the wired configuration, while the mounting interface, propeller adapter thread and battery cell range define the stated mechanical and electrical integration requirements.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BrotherHobby Avenger 5210 V5 295KV/365KV Motor(CW) |
| KV options | 295KV/365KV |
| Base casing | Al 7075 |
| Stator | 10mm |
| Configuration | 24N28P |
| Propeller adapter shaft thread | M5 |
| Shaft material | SUS420 |
| Cell count | 6-12SLiPo battery. |
| Bolt pattern | M4 (30X30mm) |
| Bearings | 16x8x5 |
| Rotor magnets | N52H arc magnets |
| Weight | 241gWith 75cm SR wires. |
| Wire gauge and length | 16#; 75cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Avenger 5210 V5 295KV/365KV Motor(CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
