Holybro Pixhawk 6X-RT
By HolybroThe Holybro Pixhawk 6X-RT is a modular flight controller for autonomous vehicles, combining dual-core processing, three IMUs, two barometers and Ethernet mission-computer integration. Procurement configurations include the controller module alone or a set with a baseboard, power module and cables. The developer edition currently supports the PX4 flight stack.
Explore product ↗industryHolybro Pixhawk Baseboards
By HolybroHolybro Pixhawk Baseboards support flight controllers that follow the Pixhawk Bus Standard.
Explore product ↗industryHolybro Pixhawk Debug Adapter
By HolybroThe Pixhawk Debug Adapter provides debugging interfaces for Pixhawk-compatible hardware.
Explore product ↗industryHolybro Pixhawk Jetson Baseboard
By HolybroThe Holybro Pixhawk Jetson Baseboard combines Pixhawk and NVIDIA Jetson on one board.
Explore product ↗industryHolybro Pixhawk RPi CM4/5 Baseboard
By HolybroThe Holybro Pixhawk RPi CM4/5 Baseboard connects a Pixhawk flight controller module with a Raspberry Pi companion computer.
Explore product ↗industryHolybro PM02D Power Module
By HolybroThe PM02D supplies regulated battery power to Pixhawk 5X and 6X flight controllers.
Explore product ↗industryHolybro PM02D Power Module (2S-12S)
By HolybroThe Holybro PM02D Power Module (2S-12S) combines regulated flight-controller power with digital battery voltage and current monitoring for Pixhawk 5X/6X systems. Supplied assembled with XT60 connectors, silicone wiring and a six-pin cable, it requires attention to wiring current limits, controller compatibility and HV-version setup. It is not designed to power servos.
Explore product ↗industryHolybro PM03D Power Module
By HolybroThe PM03D supplies regulated power and reports current consumption and battery voltage over I2C.
Explore product ↗industryHolybro PM07
By HolybroThe Holybro PM07 combines a power module and power distribution board, supplying regulated flight-controller power, analog battery monitoring and power and signal distribution for up to eight ESCs. It includes pre-soldered wires, a capacitor and an XT60 connector. Integration must account for supplied wiring current limits and separate servo-rail power requirements.
Explore product ↗industryHolybro PM07 Power Module (14S)
By HolybroThe Holybro PM07 supplies battery power to a flight controller.
Explore product ↗industryHolybro PMW3901 Optical Flow Sensor
By HolybroThe Holybro PMW3901 Optical Flow Sensor integrates with flight controllers through documented ArduPilot and PX4 configuration workflows. Setup requires firmware-specific sensor and port settings, followed by inspection of optical flow readings. PX4 additionally requires a flight controller reboot or power cycle to save settings.
Explore product ↗industryHolybro Power Distribution Board (PDB) 60A
By HolybroThis power distribution board is used with PM02 and PM02D power modules.
Explore product ↗