ChinaDrone.Request a quote ↗
COMPONENTZHTAERO

MN3520

Company: ZHT Technology Co., Ltd. ↗

The MN3520 from ZHT Technology Co., Ltd. is a propulsion motor for multirotor and fixed-wing UAVs, with a stated maximum thrust of 3.6kg. Its highlighted mechanical features include high-strength construction, a qualified EZO bearing and “Super Balance.”

Get a free sourcing quote for MN3520

MN3520 UAV motor with silver housing, exposed copper windings and black wires
MN3520 UAV motor with silver housing, exposed copper windings and black wires
ManufacturerZHT Technology Co., Ltd.
ModelMN3520
Product type and applicationMotor for multirotor and fixed-wing UAVs
Maximum thrust3.6kg
BalanceSuper Balance
ConstructionHigh-strength construction

Product overview

The MN3520 from ZHT Technology Co., Ltd. is a UAV motor intended for multirotor and fixed-wing aircraft propulsion. Its procurement scope is a motor component, with a stated maximum thrust of 3.6kg, rather than a complete flight platform or an airframe-only kit.

Its highlighted construction features are high-strength construction, a qualified EZO bearing and the balance designation “Super Balance.” These identify the motor’s stated mechanical attributes; the 3.6kg figure describes maximum thrust and should not be interpreted as an aircraft payload rating.

Specifications

SpecificationValue & conditions
ManufacturerZHT Technology Co., Ltd.
ModelMN3520
Product type and applicationMotor for multirotor and fixed-wing UAVs
Maximum thrust3.6kg
BalanceSuper Balance
ConstructionHigh-strength construction
BearingQualified EZO bearing

Ask for the MN3520 price ↑

More motors, ESCs & propellers from Chinese manufacturers →
CKESC Breeze 40A-M FOC electronic speed controller with exposed circuit board and attached wires
Component

CKESC Breeze 40A-M FOC

CKESC

The CKESC Breeze 40A-M FOC is a compact UAV electronic speed controller for 6~14S propulsion systems. Its 40 A maximum continuous current requires specific cooling conditions. The 30 g controller includes wiring, uses FOC motor control with vfast observer technology, and offers customizable serial control and output alongside multiple protection functions.

View details
Pair of HOBBYWING MSC 28x9.2 carbon fiber drone propellers on a white background.
Component

HOBBYWING MSC 28x9.2

HOBBYWING

The HOBBYWING MSC 28x9.2 is a non-folding drone propeller constructed from carbon fiber and epoxy resin. Its published configuration has a bright mirror finish and manufacturer-recommended motor combinations. Procurement assessment should confirm mounting and configuration, preserving the distinction between recommended operating values and the separately stated ultimate thrust.

View details
CM 5320 CINE FPV motor, 235KV version, with black housing and silver shaft
Component

CM 5320 CINE FPV Motor

By MAD Components

The MAD CM 5320 CINE FPV Motor is a cinematic FPV propulsion component offered in 235KV, 360KV and 400KV versions. Its D: 63 × 64 mm body includes centrifugal heat dissipation, multiple mounting provisions and 750 mm wiring, with propeller attachment hardware and electrical connection accessories supplied.

View details
FlashHobby H550 1220KV helicopter motor with silver housing and black end cap
Component

FlashHobby H550 Helicopter Motor

FlashHobby

The FlashHobby H550 Helicopter Motor is a helicopter propulsion component with 44.6x59.5mm dimensions, a 6mm shaft and an M3 mounting interface. It specifies a 5mm male connector and recommends a 120A ESC. Conflicting speed constants, battery ranges and construction specifications leave its exact configuration unresolved.

View details
GEPRC SPEEDX2 1505 4300KV motor with black housing, red trim and attached wires
Component

GEPRC SPEEDX2 1505 4300KV Motor

By GEPRC

The GEPRC SPEEDX2 1505 4300KV is a motor for lightweight drones using 2.5–3.5 inch blades. It features N52H magnets, single strand copper winding and NSK/NMB bearings. Supplied with mounting screws, it weighs 12.7g including wire and specifies a 16.8V input with a 4S LiPo.

View details
KEEP EXPLORING

Similar products

Browse all products ↗
T-MOTOR NS47*18 propeller blade in side profile
Motors & ESCs

T-MOTOR NS47*18 propeller

By T-MOTOR

The T-MOTOR NS47×18 is a carbon fiber drone propeller for manned UAV propulsion, intended for the U15L manned aircraft kit. This propulsion component carries a 12-month warranty from the date of purchase, with valid proof of purchase required.

View product →Enquire ↗
T-MOTOR Air Gear 355 Quick-Release kit AIR2213 motor with folding propeller.
Motors & ESCs

T-MOTOR Air Gear 355 Quick-Release Drone Motor Kit

By T-MOTOR

T-MOTOR’s Air Gear 355 Quick-Release Drone Motor Kit is a DIY UAV propulsion package combining AIR2213 KV1000 motors, a 4-in-1 ESC, and folding propellers. The published 2–4S ESC input helps define electrical integration, while missing installation dimensions, unspecified performance conditions, and differing efficiency claims limit procurement assessment.

View product →Enquire ↗