The G27*8.8 from ZHT Technology Co., Ltd. is a G Series propeller in its power-system range. It carries the size designation G27*8.8Inch and is supplied as two pieces per pair, defining a paired propeller configuration.
ZHT Technology Co., Ltd.’s G27*8.8 is a propeller in the G Series power-system range. Its stated size designation is G27*8.8Inch.
The supplied configuration comprises two propellers per pair. The G27*8.8 is therefore offered as a paired propeller component.
| Specification | Value & conditions |
|---|---|
| Manufacturer | ZHT Technology Co., Ltd. |
| Model | G27*8.8 |
| Product category | G Series power-system propeller |
| Propeller size designation | G27*8.8Inch |
| Supplied quantity | 2 pieces per pair |
The Scorpion HKIV-5035-500KV (8mm 55mm) is a 785 g electric propulsion motor with a 12-arm, 10-pole architecture and 500 KV rating. It supports up to 12s LiPo, with continuous limits of 120 amps and 5328 watts; higher peak ratings are limited to five seconds.
The T-MOTOR AUZ 17*10 is a one-piece propeller for electric fixed-wing UAVs, combining carbon-fiber composite construction with a PMI foam core. It has a 17-inch diameter, 10-inch pitch and flange mount with an Ø8mm center hole. Recommended maxima are 8200 RPM and 8 kg thrust.
The BrotherHobby Avenger 4112 V5 560KV/720KV Motor(CW) is an FPV drone propulsion motor with Al 7075 casing components, a 12mm stator and N52H arc magnets. It supports 6-8S LiPo power and uses an M3 mounting pattern and M5 propeller adapter thread. Weight is 168g with 30cm SR wires.
The Axisflying ARGUS PRO 100A+ ECO F722 Stack 8S is an electronics stack for 15-inch heavy-lift FPV drones. It pairs an ECO F722 flight controller with an 8-bit or 32-bit Argus Pro 100A ESC, aluminum cooling parts and 4–8S LiPo input. The ESC supports 100A continuous current; telemetry is limited to the 32-bit version.
The EMAX AVAN TH Turtlemode Propeller is a purple, four-blade propeller set intended to support Tinyhawk turtle-mode operation. It has a 40mm diameter, 31mm pitch and weight of 0.63 g. Its design targets increased thrust at lower RPMs compared with the stock Avan Tinyhawk propeller, including reverse thrust for turtle mode.
The MAD FS 2207.5 Turbo FPV Drone motor is an FPV propulsion component with a 12N14P configuration, M5 nut propeller attachment and 150 mm motor cable. Motor options pair 1750KV and 1960KV with 6S, and 2550KV with 4S. A rotor hardware option is also listed.
The Scorpion HK-4035 Shaft Kit (8mm 30mm) supplies an 8mm-diameter, 94.7mm-long hardened steel replacement shaft, one washer and two C-clips for HK-4035 helicopter motors. Removing the shaft from Scorpion motors requires a bearing press or drill press and wooden-block support for the aluminum front housing.
The FlashHobby D3530 Fixed Wing Motor is a 74g three-phase brushless outrunner supplied with accessories for fixed-wing propulsion integration. It uses ESC and PWM control, with 1700KV, 1400KV, 1100KV and custom KV options. Three configurations specify different maximum pull, power and suggested propeller sizes within a shared DC7.4–15.0V range.
The T-MOTOR AT2317 Long Shaft Outdoor 3D Trainer Glider Motor serves 800-1200g fixed-wing aircraft, including 3D airplanes and sailplanes. Offered in KV880, KV1250 and KV1400 variants, it combines a mounting cross, 4mm shaft dimensions and 2-4S LiPo support. The package contains one motor and a hardware pack; electrical ratings depend on the selected winding.
The MAD 4012 EEE V1.0 is a drone motor.