ChinaDrone.Request a quote ↗
COMPONENT

Yifei Zhineng UHS1100

By Yifei Zhineng ↗

The Yifei Zhineng UHS1100 is a compact automatic drone docking station with charging, environmental control and vision-plus-RTK landing guidance. Designed around DJI aircraft integration, it supports unattended workflows and inter-station flights. Its double-door enclosure requires mains power, with optional integration equipment and defined temperature, rainfall and closed-hangar protection limits.

Get a free sourcing quote for Yifei Zhineng UHS1100

UHS1100 automatic drone docking station with its enclosure closed
UHS1100 automatic drone docking station with its enclosure closed
Product identity and typeYifei Zhineng UHS1100 compact automatic drone docking station, described for DJI M400 / M350 integration.
Opening mechanismUHS1100; double-door opening.
Closed dimensionsLength ≤1200 mm; width ≤1100 mm; height ≤1195 mm.Closed; excludes rocker-arm and antenna height.
Open dimensionsLength ≤2600 mm; width ≤1100 mm; height ≤675 mm.Top doors fully open; excludes rocker-arm and antenna height.
Weight≤260 kg.
Power supply220–240 VAC, 50–60 Hz.AC mains input.

Product overview

The Yifei Zhineng UHS1100 is an automatic drone docking station for charging, sheltered aircraft accommodation and unattended missions. Its introduction identifies DJI M400 and M350 integration, while its specification table names the DJI Matrice 400. The physical design combines double-opening top doors, a thermally insulated double-layer enclosure, industrial air conditioning and an aircraft-cooling circulation fan. The landing platform incorporates drainage and rain protection. Installation planning must accommodate a closed length of up to 1200 mm and a fully open length of up to 2600 mm.

The station uses combined visual and RTK landing guidance, with landing accuracy specified within 15 cm. Network RTK is supported, while a local RTK base station is optional. Communications include wired broadband, wireless networking and 4G; 5G requires optional CPE. Equipment choices include weather monitoring, nighttime-landing hardware and hangar sensors. Aircraft parameters depend on the delivery contract. Operation is limited to -20°C to 50°C and no more than light rain, defined as ≤10 mm per 24 hours; IP55 protection applies with the hangar closed.

Specifications

SpecificationValue & conditions
Product identity and typeYifei Zhineng UHS1100 compact automatic drone docking station, described for DJI M400 / M350 integration.
Opening mechanismUHS1100; double-door opening.
Closed dimensionsLength ≤1200 mm; width ≤1100 mm; height ≤1195 mm.Closed; excludes rocker-arm and antenna height.
Open dimensionsLength ≤2600 mm; width ≤1100 mm; height ≤675 mm.Top doors fully open; excludes rocker-arm and antenna height.
Weight≤260 kg.
Power supply220–240 VAC, 50–60 Hz.AC mains input.
Power consumptionStandby 300 W; peak 2800 W.Standby and peak operation, respectively.
Specified compatible aircraftDJI Matrice 400.
Charging timeAs fast as 45 minutes.Battery charged from 0 to 100%.
Door opening time30 seconds.
Temperature controlIndustrial air conditioning.
Backup duration≥2 hours.UPS backup power.
Landing guidanceCombined vision and RTK guidance.Network RTK or base-station RTK; base-station RTK requires an optional configuration.
Operating temperature-20°C to 50°C.During operation.
Storage temperature-15°C to 50°C.During storage.
Rainfall limitNo more than light rain, ≤10 mm/24 h.During operation.
CommunicationsWired broadband, wireless networking, 4G and 5G.5G requires optional 5G CPE.
Ingress protectionIP55.Hangar closed.
Supported functionsEnvironmental monitoring and nighttime landing.
Failure-free operation2000 cycles / 5000 hours.
Aircraft integration envelope and routingCompatibility is described for mainstream drones within this size envelope; supports takeoff at one station and landing at another, plus station-to-station hopping.Mainstream drones within the DJI M400 unfolded dimensions.
Landing accuracyWithin 15 cm.Using the proprietary visual guidance and landing flight-control algorithms.
Effective operating radius≥8 km.
Thermal enclosure architectureDouble-layer enclosure provides thermal insulation; a dedicated air-circulation fan cools the aircraft.
Landing platform drainageInternal landing-platform drainage and rain-protection design.
Remote-controller antenna enclosureExternal antenna housing made from electromagnetically transparent material.
Integration optionsMicro-weather monitoring, UPS and nighttime-landing modules; concealed underside aviation-style power connector wiring; smoke, water-ingress and movement sensors; and a local-network RTK base station.Optional equipment selections.
Unattended workflowSupports an end-to-end unattended operating workflow.Drone, A-FCS cloud platform, payload and AI scenario algorithms combined.
Aircraft configurationAircraft parameters can be customized and are determined by the delivery contract.Customized aircraft configuration; subject to the delivery contract.

Ask for the Yifei Zhineng UHS1100 price ↑

Tattu 6S 4500mAh 22.2V 25C LiPo drone battery with silver casing, power leads and yellow connector
Component

Tattu 6S 4500mAh 22.2V 25C Lipo Drone Battery

By Grepow

The Grepow Tattu 6S 4500mAh 22.2V 25C Lipo Drone Battery is a soft-pack power source for UAV and UAS applications. Its six-cell 6S1P architecture combines a 25C discharge rating, 50C maximum burst rating and JST-XHR-7P balancing connector in a 138 × 42.5 × 52mm package.

EV-PEAK EN1 battery charger resting on a hand
Component

EV-PEAK EN1

EV-PEAK

The EV-PEAK EN1 is a compact 12W/1A intelligent balance charger for entry-level RC and drone battery charging. It supports 1-8-cell NiMH batteries, accepts 100-240V AC input and weighs 100g. Automatic charging startup, LED status indication and multiple protection functions support straightforward operation.

GOFLY-RC FPV Multifunctional Battery Protection Board with translucent casing and wired connector
Component

GOFLY-RC FPV Multifunctional Battery Protection Board

GOFLY-RC

The GOFLY-RC FPV Multifunctional Battery Protection Board combines LiPo impact protection, digital voltage monitoring, selectable LED navigation lights and audible alarms for Type X multirotors. This 26 g accessory includes a battery strap and manual. It ships configured for 4S LiPo power; 3S operation requires a soldering modification.

G3 tethered power system ground box with touchscreen, control buttons and cable outlet
Component

QIHEHUI G3 TETHERED POWER SYSTEM

QIHEHUI

The QIHEHUI G3 TETHERED POWER SYSTEM combines a ground power box, tether cable and onboard power supply for UAV integration. It offers 3.5KW rated ground power, 2KW or 3KW onboard configurations, standard tether lengths of 55/110/160m, and custom cable, interface and mounting options upon request.

KEEP EXPLORING

Similar products

Browse all products ↗
WES battery 24S 70Ah industrial drone battery with silver casing, carrying handle and power cable
Batteries & charging

WES battery 24S 70Ah Heavy-Lift Industrial Drone Battery

WES Battery

The WES battery 24S 70Ah Heavy-Lift Industrial Drone Battery is a single 86.4V semi-solid-state pack storing 6048Wh. It powers heavy-lift hexacopters and octocopters in logistics, agriculture and emergency response. It is a battery only, not a flight platform. It weighs 22.5 KG, operates from -20°C to 70°C, and includes SOX state estimation and smart parallel operation.