ChinaDrone.Request a quote ↗
COMPONENT

WES battery 24S 70Ah Heavy-Lift Industrial Drone Battery

By Huizhou WES New Energy Co., Ltd ↗

The WES battery 24S 70Ah Heavy-Lift Industrial Drone Battery is a single 86.4V semi-solid-state pack storing 6048Wh. It powers heavy-lift hexacopters and octocopters in logistics, agriculture and emergency response. It is a battery only, not a flight platform. It weighs 22.5 KG, operates from -20°C to 70°C, and includes SOX state estimation and smart parallel operation.

Request a quote ↗
WES battery 24S 70Ah industrial drone battery with silver casing, carrying handle and power cable
WES battery 24S 70Ah industrial drone battery with silver casing, carrying handle and power cable
Capacity / Energy70Ah / 6048Wh
Voltage86.4V (24S)24S series configuration
Discharge / Charge140A (2C) / 70A (1C)140A continuous discharge at 2C; 70A charge at 1C
Weight / Dimensions22.5 KG / 361x203x262mm
Cycle Life300+ Cycles @ 80%At 80% capacity
Smart FeaturesSOX Algorithm, Smart Parallel, Soft-Start

Product overview

Huizhou WES New Energy's 24S 70Ah pack is a high-voltage energy source for industrial multirotors. Its 24-cell series layout gives 86.4V and 70Ah, for a total of 6048Wh. The higher voltage lowers the current needed for a given power output, which reduces heat and electrical load on ESCs and motors. The pack is designed for heavy-lift hexacopters and octocopters carrying payloads of 100-200kg. Its intended applications are logistics, agriculture and emergency response.

The battery is rated for 140A continuous discharge (2C) and 70A charging (1C). It uses semi-solid-state cells, which offer better thermal stability than conventional LiPo. Built-in management features include a SOX algorithm that estimates state of charge and state of health, and a smart parallel function that balances multiple packs automatically when they are connected together. A one-key startup and soft-start are also provided. Dual short-circuit protection responds in under 100 microseconds. The pack also has active cell balancing, a cooling system and an IP54 rating.

The pack measures 361x203x262mm and weighs 22.5 KG. Integrators need to check that the frame has enough mounting space, structural capacity and center-of-gravity margin for this size and weight. The operating range is -20°C to 70°C. Cycle life is 300+ cycles at 80% capacity, which should be included in fleet replacement planning. Very low self-consumption allows the pack to sit in storage for a full year without maintenance.

Specifications

SpecificationValue & conditions
Capacity / Energy70Ah / 6048Wh
Voltage86.4V (24S)24S series configuration
Discharge / Charge140A (2C) / 70A (1C)140A continuous discharge at 2C; 70A charge at 1C
Weight / Dimensions22.5 KG / 361x203x262mm
Cycle Life300+ Cycles @ 80%At 80% capacity
Smart FeaturesSOX Algorithm, Smart Parallel, Soft-Start
Operating Temp-20°C to 70°C
Ingress protectionIP54
Cell technologySemi-solid state
Intended platformsHeavy-lift hexacopters and octocopters
Supported payload class100-200kgDrones carrying 100-200kg payloads
Short-circuit protection responseDual protection, under 100 microseconds
StartupOne-Key Startup
Storage maintenanceNo maintenance for one year in storageWhile in storage
Thermal managementCooling system with active cell balancing
SOURCE WITH CHINADRONE

Request a quote for WES battery 24S 70Ah Heavy-Lift Industrial Drone Battery

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
SkyRC PC1080-6S battery charger with two displays and a carrying handle
Batteries & charging

SkyRC PC1080-6S

By SkyRC Technology Co., Ltd.

The SkyRC PC1080-6S is a mains-powered, dual-channel charger for industrial drone batteries, supporting 6S LiPo and LiHV packs. It provides 1080W total charging output, battery measurement functions and storage operation. The supplied configuration includes the charger, AC power cord and manual; optional charging hubs extend it to sequential multi-pack charging.

JF-TS3-6S-27Ah solid-state drone battery packs with attached leads
Batteries & charging

JF-TS3-6S-27Ah

By Beijing Jianfan Technology

Beijing Jianfan Technology’s JF-TS3-6S-27Ah is a TS3 solid-state lithium-ion battery intended for UAVs, automated drone docks, robots and unmanned boats. The series supports parallel connection and specifies 280Wh/kg energy density, with cycle figures ranging from 300 to 1,000 under different charge and discharge conditions.