The XJSF W8024(2.4G 12dB) is a wireless communication module featuring UART communication and support for one power-control channel. The specified 5V–24V range applies to its power-control function, alongside the module’s stated UART communication interface.
The XJSF W8024(2.4G 12dB) is a wireless communication module that uses UART communication.
The module supports one power-control channel with a specified voltage range of 5V–24V.
| Specification | Value & conditions |
|---|---|
| Model | XJSF W8024(2.4G 12dB) |
| Product type | Wireless communication module |
| Communication interface | UART |
| Power control | One power-control channel, 5V–24V |
The Kimpok KP-T1210M is a compact analog FPV video transmitter accessory with eight channels across 1080MHz- 1360MHz. It provides switchable 25mW/200mW/1000mW output, an SMA antenna connection and a 7-36V input. Measuring 46x36x12mm and weighing 21g, it is intended for integration with traditional analog FPV equipment.
The RadioLink R4FGM is a four-channel mini RC car receiver with an integrated, adjustable gyro. Measuring 25*13mm and weighing 3g, it supports 3-10V input and high-voltage servos. It uses FHSS communication with 67-channel frequency hopping and comes with one package bag.
The FlySky NV14 Nirvana is a 14-channel radio transmitter for FPV racing drones. It combines AFHDS 2A communication, Hall-effect gimbals, a 3.5-inch HVGA TFT display, OpenTX software and vibration alerts. USB and PPM interfaces and a JR bay RF-module adapter provide integration options.
The CADDX Walksnail Avatar HD GT Kit is a digital FPV camera and video transmission kit for aircraft integration. It combines an AVATAR PRO low-light camera, dual antennas, microSD recording and selectable HD frame rates. Compact camera dimensions, two transmitter mounting patterns and a 140mm coaxial cable define its installation requirements.
The Happymodel CrazyF411 AIO F4 FC is a compact flight-controller board for toothpick UAV builds, integrating a 20A-per-channel four-in-one ESC, diversity receiver, Betaflight OSD and power monitoring. Its 6.3g architecture supports 2–4S operation, two UARTs and several receiver protocols, with firmware-specific binding procedures and a five-second limit on 25A peak ESC current.
The MDOT Apsaraslink R1 is an integrated UAV ground controller combining video, telemetry and RC with an Android touchscreen, RF hardware and dual batteries. It pairs with optional A27 or A30 air units for agricultural spraying, inspection and emergency communications, with range dependent on the paired module and operating conditions.
The RadioLink R9DS is a 9/10-channel RC receiver with simultaneous SBUS and PWM outputs for aircraft and other models. It supports selected RadioLink transmitters and module-dependent telemetry. The package contains one receiver and a packing bag; its stated 4000-meter maximum range applies to unobstructed, interference-free conditions.
The Xingkai XK-GCS310 is a suitcase-format ground control station for unmanned vehicles and payloads. It integrates a Windows 10 computer, dual displays, Hall-sensor joysticks and a lithium battery pack. The 15KG system combines an IP67 enclosure with data, video and feeder connections for system integration.
Tatusky Technology Co., Ltd’s item 00403 is a compact LDMOS digital modulation power amplifier module for countering FPV remote signals. The identified configuration carries a 50W designation and a 700-1000Mhz frequency band. It is intended for machine integration, with customization supported for frequency band and power.
The RadioLink R12DS is a 12-channel receiver for remotely controlled aircraft and other models. It combines detachable antennas, simultaneous SBUS and PWM outputs, and a 3.6-12V input range. The package supplies one receiver and a packing bag; model-voltage telemetry requires pairing with a PRM-01 module.