ChinaDrone.Request a quote ↗
COMPONENT

RadioLink R9DS

By RadioLink ↗

The RadioLink R9DS is a 9/10-channel RC receiver with simultaneous SBUS and PWM outputs for aircraft and other models. It supports selected RadioLink transmitters and module-dependent telemetry. The package contains one receiver and a packing bag; its stated 4000-meter maximum range applies to unobstructed, interference-free conditions.

Request a quote ↗
RadioLink R9DS receiver with antenna wire and labeled connection pins
RadioLink R9DS receiver with antenna wire and labeled connection pins
Product identity and typeRadioLink R9DS 9/10-channel receiver
Maximum control range4000 meters (2.48 miles)Tested in an unobstructed area free of interference.
Spread-spectrum systemDSSS and FHSS hybrid spread spectrum
Frequency hopping16-channel pseudo-random frequency hopping
ModulationQPSK
Maximum PWM jitter1.84us maximum

Product overview

The RadioLink R9DS is a receiver component for radio-controlled aircraft and other models, with 9/10-channel SBUS and PWM outputs that can operate simultaneously. Its radio architecture combines DSSS and FHSS spread spectrum, 16-channel pseudo-random frequency hopping and QPSK modulation. Aircraft applications include rotary-wing platforms, fixed-wing aircraft, gliders and multicopters; cars, boats and robots are also supported. Transmitter integration is specified for the RadioLink AT10II, AT10, AT9S Pro, AT9S and AT9. The supplied package contains one R9DS receiver and one packing bag.

The stated maximum control distance is 4000 meters (2.48 miles), measured in an unobstructed area free of interference. Maximum PWM jitter is 1.84us, with a stated standard value of 0.25us. Electrical specifications give both a 3–10-volt operating tolerance and a separate 3.6–12V input range, leaving two different voltage limits. Telemetry depends on the paired flight module: PRM-01 displays model voltage, while PRM-03 adds speed, position, attitude and other flight information on the transmitter screen.

Specifications

SpecificationValue & conditions
Product identity and typeRadioLink R9DS 9/10-channel receiver
Maximum control range4000 meters (2.48 miles)Tested in an unobstructed area free of interference.
Spread-spectrum systemDSSS and FHSS hybrid spread spectrum
Frequency hopping16-channel pseudo-random frequency hopping
ModulationQPSK
Maximum PWM jitter1.84us maximum
Standard PWM jitter0.25us standard
Signal outputs9/10 channels; simultaneous SBUS and PWM output
Supported model typesRotary wing, fixed wing, glider, multicopter, car, boat and robot
Operating voltage tolerance3 to 10 volts
Input voltage3.6–12V
PRM-01 telemetryModel voltage displayed on the transmitter screenPaired with flight module PRM-01.
PRM-03 telemetryTransmitter display of model voltage, speed, climb, throttle, longitude, latitude, altitude, GPS, RSSI, flight mode, yaw, roll, pitch and distanceWith flight module PRM-03.
Compatible transmittersRadioLink AT10II, AT10, AT9S Pro, AT9S and AT9
Supplied configurationOne R9DS receiver and one packing bag
SOURCE WITH CHINADRONE

Request a quote for RadioLink R9DS

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
FLYSKY Technology Co.,Ltd FS- i6 Remote Controller
Links & controllers

FS- i6

By FLYSKY Technology Co.,Ltd

The FlySky FS- i6 is an entry-level radio-control transmitter for fixed-wing aircraft, gliders, helicopters and boats. It provides six channels with upgrade capability to ten, AFHDS 2A communication and a PS/2 PPM interface. The dual-antenna body incorporates an LCD and requires four AA batteries.