ChinaDroneRequest a quote →

Wuwei W689

The Wuwei W689 is a six-axis inertial measurement unit for flight-control attitude sensing, motion detection, vibration monitoring and low-power wake-up. It combines three-axis acceleration and angular-rate sensing with temperature sensing, FIFO buffering and motion-detection logic, offering I2C and SPI interfaces for embedded UAV, robotics and smart-hardware applications.

WuweiPayloads & thermal cameras
Applications
Flight-control attitude sensing, dynamic motion detection, UAVs, robots, gimbals, remote-control equipment, smart hardware, low-power wake-up and embedded systems requiring I2C/SPI six-axis acquisition, status interrupts or FIFO buffering.

Get a free quote

Product overview

The Wuwei W689 integrates a three-axis accelerometer, three-axis gyroscope, temperature sensor, FIFO and motion-detection logic in a six-axis inertial measurement unit. It supports flight-control attitude sensing, dynamic motion detection, vibration monitoring and low-power wake-up applications in UAVs, robots, gimbals, remote-control equipment and smart hardware. All six motion-sensing axes provide 16 bit two's-complement output. Selectable accelerometer ranges extend from ±2 g to ±16 g, while gyroscope ranges extend from ±125 dps to ±2000 dps.

I2C, 3-wire SPI, 4-wire SPI and an OIS auxiliary SPI interface support embedded integration, with a maximum main SPI clock of 10 MHz. A built-in 2k × 16 bit FIFO accompanies Data Ready, interrupt, AOI, tap, step-counting and wrist-raise functions. Analog supply voltage is 1.71 V to 3.6 V; I/O supply voltage is 1.08 V to 3.6 V. The operating temperature range is -40°C to +85°C. Pin and package compatibility covers ICM-42688 and BMI270, with software adaptations for BF, INAV, PX4 and AP.

Cameras & sensors

Specifications

Wuwei W689 specifications
SpecificationValue & conditions
Product typeWuwei W689 six-axis inertial measurement unit.
Integrated componentsThree-axis accelerometer, three-axis gyroscope, temperature sensor, FIFO and motion-detection logic.
Output format16 bit two's-complement output on all six axes.
Accelerometer ranges±2 g, ±4 g, ±8 g, ±16 g.
Gyroscope ranges±125 dps, ±250 dps, ±500 dps, ±1000 dps, ±2000 dps.
Accelerometer output data rate0.78 Hz to 1.6 kHz.
Gyroscope output data rate25 Hz to 3.2 kHz.
Communication interfacesI2C, 3-wire SPI, 4-wire SPI and an OIS auxiliary SPI interface.
Maximum clock frequency10 MHz.Main SPI interface.
FIFO capacityBuilt-in 2k × 16 bit FIFO.
Supported functionsData Ready, interrupts, FIFO, AOI, tap detection, step counting and wrist-raise detection.
Analog supply voltage1.71 V to 3.6 V.Analog supply.
I/O supply voltage1.08 V to 3.6 V.I/O supply.
Temperature range-40°C to +85°C.Operating temperature.
Compatible IMU modelsPin and package compatible with ICM-42688 and BMI270.Pin and package compatibility.
Flight-control software supportAdapted for BF, INAV, PX4 and AP open-source flight-control code.
ApplicationsFlight-control attitude sensing, dynamic motion detection, UAVs, robots, gimbals, remote-control equipment, smart hardware, low-power wake-up and embedded systems requiring I2C/SPI six-axis acquisition, status interrupts or FIFO buffering.
Vibration monitoringSuitable for vibration monitoring.
Package designationLGA-14-3 x 2.5 x 1.0-0.5.

Related guides