ChinaDrone.Request a quote ↗
COMPONENT

TX-AG020 GPS L1/l2 Glonass High Precision Antenna

By Dongguan Tengxiang Electronics Co., Ltd ↗

The Tengxiang TX-AG020 GPS L1/L2 GLONASS High Precision Antenna is a compact active GNSS component for drone, surveying, navigation and industrial positioning installations. It combines an ABS enclosure, magnetic or adhesive mounting, a 3 m RG174 cable and an SMA male connector, operating from a 3.0–5.0 V DC supply.

Tengxiang TX-AG020 GNSS antenna with black square housing, coiled cable and connector
Tengxiang TX-AG020 GNSS antenna with black square housing, coiled cable and connector
Manufacturer and modelTengxiang TX-AG020 GPS L1/L2 GLONASS High Precision Antenna
Product typeHigh-precision dual-band GNSS positioning antenna
Satellite signal supportGPS L1/L2 and GLONASS
Simultaneous trackingGPS L1 and GLONASS L1
Reception architectureLow-noise amplification and interference-resistant structure
Housing materialABS

Product overview

The Tengxiang TX-AG020 is an active GNSS antenna for integration with navigation terminals, drone devices, surveying instruments and industrial positioning equipment. Its positioning role combines GPS L1/L2 support with GLONASS reception, including simultaneous GPS L1 and GLONASS L1 tracking. Low-noise amplification and an interference-resistant structure support signal reception in urban and industrial environments. The physical package uses an ABS housing measuring 42 × 36 × 14 mm, with magnetic or adhesive mounting for installation.

The supplied connection arrangement comprises a 3000 mm RG174 cable terminated with an SMA-J male connector, providing routing space between the antenna mounting position and connected equipment. Electrical integration requires 3.0–5.0 V DC, with working current specified at no more than 15 mA and impedance at 50 Ohm. The antenna has 28dBi active gain, right-hand circular polarization and a V.S.W.R limit of 2.0. Its operating envelope spans −40°C to +85°C, with humidity specified at 95% under non-condensing conditions.

Specifications

SpecificationValue & conditions
Manufacturer and modelTengxiang TX-AG020 GPS L1/L2 GLONASS High Precision Antenna
Product typeHigh-precision dual-band GNSS positioning antenna
Satellite signal supportGPS L1/L2 and GLONASS
Simultaneous trackingGPS L1 and GLONASS L1
Reception architectureLow-noise amplification and interference-resistant structure
Housing materialABS
Integration applicationsGNSS modules, navigation terminals, drone devices, surveying instruments and high-precision industrial positioning equipment
Frequency range1574.42MHz ~ 1610MHz (GPS + GLONASS)
Active gain28dBi
PolarizationRHCP
V.S.W.R≤ 2.0
Impedance50 Ohm
Working voltage3.0V ~ 5.0V DC
Working current≤ 15mA
Dimensions42 * 36 * 14 mm
ConnectorSMA-J (SMA Male)
Cable configurationRG174, L=3000mm
MountingMagnetic / Adhesive Mount
Operating temperature-40°C ~ +85°C
Humidity95%Non-condensing.
Environmental complianceRoHS 2.0

Ask for the TX-AG020 GPS L1/l2 Glonass High Precision Antenna price ↑

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC TAKER F722 BT 32Bit 50A STACK flight controller and ESC assembly
Flight control & navigation

TAKER F722 BT 32Bit 50A STACK

By GEPRC

The GEPRC TAKER F722 BT 32Bit 50A STACK is a UAV electronics assembly pairing an F722 flight controller with a four-in-one 50A ESC. It supports 3–6S LiPo input and direct DJI Air Unit connection, and includes cables and mounting hardware. The current batch lacks Bluetooth wireless parameter tuning.

Flight control & navigation

BW-MINS125(-E)

By Wuxi Beiwei Sensing Technology

The Wuxi Beiwei Sensing Technology BW-MINS125(-E) is a compact CAN-bus micro inertial navigation system for unmanned aircraft, robotics, stabilization and vehicle integration. It provides attitude measurement and heading holding in a 115 × 63 × 28.2 mm unit, with 9-36V DC power input, output up to 500Hz and operation from -40 to 85°C.