ChinaDrone.Request a quote ↗
COMPONENT

Unicore UFirebird IV UC7510A

By Unicore ↗

UC7510A is the automotive-grade variant of the UFirebird IV GNSS positioning chip.

Request a quote ↗
VariantUC7510A, automotive gradeAutomotive-grade member of the UFirebird IV family
Documented applicationsVehicles, drones and handheld devicesApplications stated for the UC7510 family
Model and gradeUC7510A; automotive gradeVariant of the UFirebird IV family.
Process22 nmFamily-level specification explicitly naming UC7510A and UC7510I.
Application relevanceDrone, vehicle and handheld applicationsApplications stated for the UC7510 family, rather than a variant-specific integration.

Product overview

The Unicore UFirebird IV UC7510A is an automotive-grade, single-frequency GNSS navigation and positioning chip from Unicore Communications, Inc. Built on a 22 nm process, it belongs to the UC7510 family intended for vehicle, drone and handheld applications. The family provides 64 channels and supports L1-band signals from BDS, GPS, GLONASS, Galileo and QZSS, along with SBAS reception and processing. It can position using multiple satellite systems together or a single system independently, with BeiDou-only and BeiDou-priority options.

UC7510A includes flash memory in a 4.0 × 4.0 × 0.75 mm QFN28 package and has an operating temperature range of -40°C to +105°C. Its automotive-grade chip qualification is AEC-Q100. The family incorporates interference mitigation and spoofing detection, and can integrate a dead-reckoning algorithm for use with an external IMU. Interfaces comprise one UART, one I2C and one SPI, with SPI support dependent on the firmware version. Available positioning update rates are 1, 5 and 10 Hz.

Integration requires V_IO and V_BACK supplies of 1.7–3.6 V and a V_CORE supply of 1.2–1.98 V. Family specifications give tracking sensitivity of -165 dBm and cold-start sensitivity of -148 dBm, with time to first fix below 26 seconds for a cold start, below 1 second for a hot start or reacquisition, and below 3 seconds with AGNSS. Positioning figures include 1.5 m horizontal accuracy with SBAS and 2.5 m vertical accuracy, although the product page labels these RMS while the product brief labels them CEP.

Specifications

SpecificationValue & conditions
VariantUC7510A, automotive gradeAutomotive-grade member of the UFirebird IV family
Documented applicationsVehicles, drones and handheld devicesApplications stated for the UC7510 family
Model and gradeUC7510A; automotive gradeVariant of the UFirebird IV family.
Process22 nmFamily-level specification explicitly naming UC7510A and UC7510I.
Application relevanceDrone, vehicle and handheld applicationsApplications stated for the UC7510 family, rather than a variant-specific integration.
SOURCE WITH CHINADRONE

Request a quote for Unicore UFirebird IV UC7510A

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
JIYI KX-XF flight controller with orange metal housing and connector ports
Flight control & navigation

JIYI KX-XF

By JIYI

The JIYI KX-XF is a flight controller for delta-wing and patrol UAVs, combining hardware and software redundancy with diagnostic algorithms. The controller weighs 321 g and supports SBUS receivers, RTK navigation, remote ground stations and intelligent AI gimbal cameras for inspection, rescue, firefighting and training applications.

CB07 communication base station with a white enclosure and two black antennas.
Links & controllers

ZIYAN CB07 Communication Base Station

By ZIYAN

The ZIYAN ZY-CB07 Communication Base Station supports long-distance UAV communications and RTK positioning from fixed sites or moving vehicles and vessels. It combines a quick-release enclosure, integrated positioning antenna and dual hot-swappable batteries, with a specified communication distance of at least 30 km and 4-hour endurance using both batteries.

GEPRC STABLE F411 three-layer electronics stack with red spacers
Flight control & navigation

STABLE F411

By GEPRC

The GEPRC STABLE F411 is a three-layer modular electronics stack for micro quads, combining an F411 flight controller, four-in-one 12A ESC and adjustable 5.8G video transmitter. It uses 16 × 16 mm mounting and supports 2–4S LiPo input. The full electronics package includes an antenna and XT30 cable.

GEPRC CEP-STABLE 12A Whoop Stack with stacked circuit boards and mounting hardware
Flight control & navigation

CEP-STABLE 12A Whoop Stack

By GEPRC

The GEPRC CEP-STABLE 12A Whoop Stack is an electronics package for small indoor Whoop and toothpick UAV builds. It combines F4 flight control, 12A ESC capability and a selectable-power 5.8GHz video transmitter. Its 2–4S LiPo support, compact M2 mounting pattern and supplied installation hardware suit integration into a separately assembled aircraft.