ChinaDrone.Request a quote ↗
COMPONENT

TX-AG013 Beidou GPS Glonass Galileo GNSS Antenna

By Dongguan Tengxiang Electronics Co., Ltd ↗

The Tengxiang TX-AG013 Beidou GPS Glonass Galileo GNSS Antenna is an external positioning antenna for drones and other navigation equipment. It combines a ceramic radiator, ABS/POM plastic components, high-gain amplification and a TNC connector, supporting four satellite systems across a specified frequency range of 1575MHz to 1606MHz.

Tengxiang TX-AG013 GNSS antenna with white domed housing and metal connector
Tengxiang TX-AG013 GNSS antenna with white domed housing and metal connector
ManufacturerTengxiang Electronics Co., Ltd.
Model and product typeTX-AG013 Beidou GPS Glonass Galileo GNSS Antenna
Supported satellite systemsGPS, GLONASS, Galileo and BeiDou
Signal architectureExternal positioning antenna with high-gain signal amplification
Intended applicationsVehicle navigation, industrial positioning terminals, drone equipment, surveying and mapping instruments, and intelligent tracking systems
Frequency1575MHz to 1606MHz

Product overview

Tengxiang Electronics Co., Ltd.’s TX-AG013 Beidou GPS Glonass Galileo GNSS Antenna is an external navigation antenna for positioning equipment. It supports GPS, GLONASS, Galileo and BeiDou, using high-gain signal amplification for satellite reception. Its intended applications include drone equipment, vehicle navigation, industrial positioning terminals, surveying and mapping instruments, and intelligent tracking systems. Within these applications, the antenna provides the satellite-signal reception component for commercial and industrial navigation and positioning systems.

The physical construction uses a ceramic radiator and ABS/POM plastic components, with a standard TNC connector providing the signal interface for installation into positioning equipment. Its electrical characteristics are a frequency range of 1575MHz to 1606MHz, antenna gain of 40 dBi, linear polarization, 50 Ohm impedance and V.S.W.R of at most 2.0. The environmental limits distinguish operation at –20 °C to +60 °C from storage at –40 °C to +80 °C.

Specifications

SpecificationValue & conditions
ManufacturerTengxiang Electronics Co., Ltd.
Model and product typeTX-AG013 Beidou GPS Glonass Galileo GNSS Antenna
Supported satellite systemsGPS, GLONASS, Galileo and BeiDou
Signal architectureExternal positioning antenna with high-gain signal amplification
Intended applicationsVehicle navigation, industrial positioning terminals, drone equipment, surveying and mapping instruments, and intelligent tracking systems
Frequency1575MHz to 1606MHz
V.S.W.RAt most 2.0
Antenna gain40 dBi
PolarizationLinear
Impedance50 Ohm
Radiator materialCeramics
Plastic materialABS/POM
Cable type/
Connector typeTNC
Operating temperature– 20 ˚C ~ + 60 ˚CDuring operation.
Storage temperature– 40 ˚C ~ + 80 ˚CDuring storage.

Ask for the TX-AG013 Beidou GPS Glonass Galileo GNSS Antenna price ↑

KEEP EXPLORING

Similar products

Browse all products ↗
APO22MINI flight controller board with white connectors and mounting holes
Flight control & navigation

APO22MINI

By Hongfei

The Hongfei APO22MINI is a compact UAV flight controller intended for formation and terminal tracking applications. It combines an STM32H743 processor, redundant inertial sensors and double-sided shielding in a 22g package. Multiple control and communication interfaces support aircraft integration, while external compass support and an optional airspeed module extend its sensing configuration.

Flight control & navigation

BW-IMU325E

By Wuxi Beiwei Sensing Technology

The Wuxi Beiwei Sensing Technology BW-IMU325E is a CAN inertial measurement unit for UAV, robotics, vehicle and stabilization applications. It combines gyroscope and three-axis accelerometer sensing with 500Hz output, compensation features and specified EMC protection. Packaged and bare board dimensions support integration planning, with 9-36V DC power and operation from -40 to 85°C.

RadioLink Byme-A fixed-wing flight controller with exposed connector pins
Flight control & navigation

RadioLink Byme-A

By RadioLink Electronic Limited

The RadioLink Byme-A is a compact fixed-wing flight controller for straight-wing trainers, F3P aerobatic aircraft and scale models. Weighing 4.5g including wires, it supports SBUS or PPM receivers and six flight modes. The package supplies the controller and installation accessories, with power provided through an ESC BEC connection.

CUAV NEO 4 Nano GNSS modules shown upright and on their side.
Flight control & navigation

CUAV NEO 4 Nano GNSS Module

By CUAV

The CUAV NEO 4 Nano GNSS Module is a miniature navigation component for unmanned systems, combining a u-blox M10 receiver, STM32H5 processor and electronic compass. Its 10.6 g body supports compact installations, while DroneCAN connects it to supported autopilot stacks. Four-system reception, configurable navigation rates and integrated status indicators define its main integration capabilities.