ChinaDrone.Request a quote ↗
COMPONENT

RadioLink Byme-A

By RadioLink Electronic Limited ↗

The RadioLink Byme-A is a compact fixed-wing flight controller for straight-wing trainers, F3P aerobatic aircraft and scale models. Weighing 4.5g including wires, it supports SBUS or PPM receivers and six flight modes. The package supplies the controller and installation accessories, with power provided through an ESC BEC connection.

Request a quote ↗
RadioLink Byme-A fixed-wing flight controller with exposed connector pins
RadioLink Byme-A fixed-wing flight controller with exposed connector pins
Product identity and typeRadioLink Byme-A fixed-wing flight controller.
Intended aircraftApplicable to straight-wing aircraft, including 3D fixed-wing (F3P), four-channel trainers and scale model aircraft.For straight-wing aircraft.
Sensors and control processingThree-axis gyroscope and three-axis acceleration sensor, combined with a full attitude algorithm, control algorithm and digital filter.
Flight modesSix flight modes: Vertical Mode (Multicopter), Vertical Mode (Fixed-wing), Stabilize Mode, Acrobat Mode, Gyro Mode and Manual Mode.
Automatic vertical postureSupports automatic flight in a vertical posture.In Vertical Mode (Multicopter).
Fixed-wing vertical assistanceVertical Mode (Fixed-wing) provides a selectable assistance mode during practice if aircraft control is lost.For pilots with some fixed-wing experience practicing manual vertical control.

Product overview

The RadioLink Byme-A is a flight-controller component for straight-wing aircraft, including F3P aerobatic models, four-channel trainers and scale aircraft. Its sensing architecture combines a three-axis gyroscope with a three-axis acceleration sensor, supported by attitude and control algorithms and digital filtering. At 4.5g including wires, it accommodates small indoor models. Integration uses a receiver with SBUS or PPM output, with channel connections assigned to aileron, elevator, throttle and rudder; the throttle connection receives power from the ESC BEC.

Six selectable modes cover two vertical-flight modes, stabilized level flight, assisted aerobatics, gyro assistance and manual control. Gyro Mode does not automatically level the aircraft, while Manual Mode removes algorithm and gyro assistance and requires advanced piloting skills. Calibration uses both transmitter sticks moved to the outside corners without dedicated parameter setting. A status/servo-phase indicator and servo-phase adjustment button support setup. The supplied package contains the controller, a receiver connection lead, double-sided adhesive tape and a packing bag; it is a controller package rather than a complete aircraft.

Specifications

SpecificationValue & conditions
Product identity and typeRadioLink Byme-A fixed-wing flight controller.
Intended aircraftApplicable to straight-wing aircraft, including 3D fixed-wing (F3P), four-channel trainers and scale model aircraft.For straight-wing aircraft.
Sensors and control processingThree-axis gyroscope and three-axis acceleration sensor, combined with a full attitude algorithm, control algorithm and digital filter.
Flight modesSix flight modes: Vertical Mode (Multicopter), Vertical Mode (Fixed-wing), Stabilize Mode, Acrobat Mode, Gyro Mode and Manual Mode.
Automatic vertical postureSupports automatic flight in a vertical posture.In Vertical Mode (Multicopter).
Fixed-wing vertical assistanceVertical Mode (Fixed-wing) provides a selectable assistance mode during practice if aircraft control is lost.For pilots with some fixed-wing experience practicing manual vertical control.
Level-flight assistanceAssists aircraft balance for beginner level-flight practice.In Stabilize Mode.
Acrobatic assistanceCombines Stabilize Mode and Gyro Mode for maneuvers including rolls, rapid pitching, backward flight, side flight and spiral descents.In Acrobat Mode.
Gyro assistance limitationGyro assistance improves flight balance without automatically leveling the aircraft.In Gyro Mode.
Manual controlAll flight movements are controlled manually without flight-controller algorithm or gyro assistance; advanced piloting skills are required.In Manual Mode.
Setup and calibrationCalibration uses both transmitter joysticks moved to the outside corners, without dedicated parameter setting.
Receiver interfaceAccepts SBUS or PPM receiver signals.Receiver must provide SBUS or PPM output.
Channel assignments and power connection
  • CH1: aileron servo;
  • CH2: elevator servo;
  • CH3: throttle, powered by ESC BEC;
  • CH4: rudder servo.
Throttle connection powered by ESC BEC.
Local indicator and adjustmentStatus/servo-phase indicator and servo-phase adjustment button.
Total weight4.5g including wires.Including wires.
Integration spaceCompact enough for installation in small indoor models.For installation in small indoor aircraft models.
Supplied configurationOne Byme-A flight controller, one receiver connection lead, one double-sided adhesive tape item and one packing bag.
SOURCE WITH CHINADRONE

Request a quote for RadioLink Byme-A

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
ComNav SinoGNSS K801 GNSS module with metal shield and edge contacts.
Flight control & navigation

ComNav K801 GNSS Module

By ComNav

The ComNav K801 GNSS Module is a compact, surface-mounted positioning component for UAV and other embedded applications. It combines dual-frequency, multi-constellation GNSS with an onboard IMU. Procurement requires checking electrical and antenna integration, supported interfaces and correction formats, and the configuration qualifications attached to its performance values.

Flight control & navigation

BW-IMU600

By BWSENSING

The BWSENSING BW-IMU600 is a compact inertial measurement unit for UAVs, navigation systems and platform stabilization. It integrates gyroscope and accelerometer measurement capabilities, orthogonal compensation and RS422 output in a 44.8 × 38.6 × 21.5 mm envelope. The standard accelerometer range is ±20g, with optional ±5g and ±50g configurations.