ChinaDrone.Request a quote ↗
COMPONENT

High-Density COB Led (12V Pink) 4mm x 1m

By Team BlackSheep ↗

The Team BlackSheep High-Density COB Led (12V Pink) 4mm x 1m is a narrow, adhesive-backed lighting strip for whoop ducts, quad arms, wings and RC cars. This 12V pink configuration provides 480led/meter, supports cutting every 25mm and mounts to dry, flat surfaces using its supplied rear adhesive tape.

Request a quote ↗
ProductTeam BlackSheep High-Density COB Led (12V Pink) 4mm x 1m
Lighting architectureHigh-density COB LED strip with adhesive backing
Strip dimensions4mm wide × 1m long
LED density480led/meter
Selected input voltage and color12V; Pink12V Pink configuration.
Input voltage specification12/24V (Check Product Name)Voltage depends on the product configuration.

Product overview

The Team BlackSheep High-Density COB Led (12V Pink) 4mm x 1m is an adhesive-backed lighting strip for attachment to whoop ducts, quad arms, wings and RC cars. Its physical format combines a 4mm width with a 1m length and a density of 480led/meter. The selected configuration provides pink lighting with a 12V input. It is a lighting accessory for integration onto these structures, rather than a flight platform or an airframe kit.

Installation uses self-adhesive tape already fitted to the back of the strip, with a dry, flat surface required for attachment without screws or clips. The 12V strip can be cut at 25mm intervals without damaging the remaining strips, allowing its length to be adapted to the mounting location. The broader input specification is 12/24V according to configuration; the 24V version has a separate 50mm cutting interval, while this pink configuration is identified as 12V.

Specifications

SpecificationValue & conditions
ProductTeam BlackSheep High-Density COB Led (12V Pink) 4mm x 1m
Lighting architectureHigh-density COB LED strip with adhesive backing
Strip dimensions4mm wide × 1m long
LED density480led/meter
Selected input voltage and color12V; Pink12V Pink configuration.
Input voltage specification12/24V (Check Product Name)Voltage depends on the product configuration.
Cutting intervalEvery 25mm without damaging the remaining strips12V version.
Cutting intervalEvery 50mm without damaging the remaining strips24V version.
Mounting methodRear self-adhesive tape; no screws or clips requiredDry and flat mounting surface.
Attachment locationsWhoop ducts, quad arms, wings and RC cars
SOURCE WITH CHINADRONE

Request a quote for High-Density COB Led (12V Pink) 4mm x 1m

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Mission payloads

K8-V2 Gimbal Camera

By HEQ UAV Intelligent Technology

The HEQ K8-V2 Gimbal Camera is a lightweight UAV imaging payload combining three-axis mechanical stabilization, a wide-angle 4K camera, 40× hybrid zoom and AI target tracking. Weighing 115g ±5g, it provides Ethernet, serial and SBUS interfaces for integration, with defined power requirements, angular travel limits and environmental ratings.