ChinaDrone.Request a quote ↗
COMPONENT

TBS Crossfire Diversity Nano RX

By Team BlackSheep ↗

The Team BlackSheep TBS Crossfire Diversity Nano RX is a compact diversity R/C receiver for long-range miniquads and smaller wings. It combines dual-input reception, PPM/SBUS/CRSF outputs and optional backup-battery support in a 1.8 g package. Supplied antennas and wiring support aircraft integration, while beacon functions assist recovery.

Request a quote ↗
Manufacturer and modelTeam BlackSheep TBS Crossfire Diversity Nano RX
Product type and intended integrationNano-form-factor R/C receiver for long-range miniquads or smaller wings.
Diversity architectureTrue dual-input stage with chip-based diversity and filtering for noise from onboard video systems.
Transmitter firmware requirementCrossfire transmitter firmware V2.88 or above.Before binding.
Signal formatCRSF
Minimum frequency868 MHz

Product overview

The Team BlackSheep TBS Crossfire Diversity Nano RX provides the R/C receiver component for long-range miniquads and smaller wings. Its 24 × 18 × 5 mm body weighs 1.8 g, giving integrators a compact component to accommodate within the aircraft. The receiver combines a true dual-input stage with chip-based diversity and filtering against onboard video-system noise. It uses CRSF signaling, supports PPM/SBUS/CRSF outputs, operates at 868–915 MHz, and accepts 3.3–8.4 V input power.

The supplied configuration contains one receiver, two TBS Crossfire Micro Receiver antennas, a spare shrink tube and fourteen 30 AWG silicone connection wires. A separate, optional 1s backup battery supports power redundancy and a stated full day of receiver operation after loss of onboard electronics; aircraft power also charges that battery. Beacon functions include GPS-coordinate reporting and RF locating without onboard GPS. Binding requires Crossfire transmitter firmware V2.88 or above. The specification lists 12 channels and 40 km range, while the receiver description separately specifies eight-channel outputs without explaining the difference.

Specifications

SpecificationValue & conditions
Manufacturer and modelTeam BlackSheep TBS Crossfire Diversity Nano RX
Product type and intended integrationNano-form-factor R/C receiver for long-range miniquads or smaller wings.
Diversity architectureTrue dual-input stage with chip-based diversity and filtering for noise from onboard video systems.
Transmitter firmware requirementCrossfire transmitter firmware V2.88 or above.Before binding.
Signal formatCRSF
Minimum frequency868 MHz
Maximum frequency915 MHz
Minimum input voltage3.3 V
Maximum input voltage8.4 V
Range40 km
Channels12
Described output channel count8-channel outputs; the specification lists 12 channels without explaining the distinction.
Output formatsPPM/SBUS/CRSF
Weight1.8 g
Height5 mm
Width18 mm
Length24 mm
Power redundancyIntegrated power-redundancy circuit.Backup battery not included.
Backup operationReceiver operation for a full day after loss of onboard electronics.Optional 1s backup battery connected to the LiPo battery port.
Recovery functionsGPS-coordinate reporting and RF beacon signals for locating the aircraft.Beacon mode; RF locating can operate without an onboard GPS.
Backup battery chargingThe receiver charges the backup battery when aircraft power is applied.Optional 1s backup battery connected and power applied to the aircraft.
Receiver supplied1 × TBS Crossfire Diversity Nano ReceiverIncluded equipment.
Antennas supplied2 × TBS Crossfire Micro Receiver AntennaIncluded equipment.
Shrink tube supplied1 × spare shrink tubeIncluded equipment.
Connection wires supplied14 × 30 AWG silicone connection wiresIncluded equipment.
SOURCE WITH CHINADRONE

Request a quote for TBS Crossfire Diversity Nano RX

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
RadioLink ER16 receiver circuit board with two antenna connectors
Links & controllers

ER16

By RadioLink Electronic Limited

The RadioLink ER16 is a 16-channel ExpressLRS 2.4G receiver for compact FPV, racing and autonomous aircraft installations. It combines dual IPEX MHF 1 antennas, 20 × 12 mm dimensions, 1.2 g weight and a 4–9 V input. It comes pre-flashed with V3.3 firmware and supports Betaflight, APM and Wi-Fi firmware updates.

Links & controllers

HX-MB-PX-L35

By Xinuo Maitian

The Xinuo Maitian HX-MB-PX-L35 is a miniaturized PX-platform communications board for industrial UAVs, ground robots and other carriers. It belongs to the manufacturer's point-to-point wireless image/data and self-organizing networking families, with applications in 100Km communication data-link scenarios.

GEPRC MATEN 5.8G 2.5W video transmitter with black finned housing and four mounting holes
Links & controllers

GEPRC MATEN 5.8G 2.5W VTX

By GEPRC

The GEPRC MATEN 5.8G 2.5W VTX is a compact drone video transmitter with five power levels up to 2500mW, 72 channels and IRC Tramp control. Its aluminum housing, M3 mounting pattern and supplied antenna accessories support installation, while continuous airflow, correct antenna installation and careful power wiring remain essential operating requirements.