Product overview
The Tatusky TTSK-WT01 continuously scans 70 MHz – 6 GHz to recognize drone control and video links for counter-UAS, surveillance and command-and-control platforms. Supported signals include DJI ID, Lightbridge, OcuSync OCU1/2/3/4, Autel, HUBSAN, Walksnail, analog PAL/NTSC, Lora / ExpressLRS, Mavlink / P900 / P840 and modified LTE. Detection range is 1 km – 10 km, depending on drone power, antenna gain and environment. Scanning, classification and protocol decoding run on the module; a host device receives and displays the results.
An aluminum housing measuring 89 × 55 × 18 mm accommodates integration into portable, vehicle-mounted and tower installations. The module uses 5V DC and consumes 3.3W, with RX2 enabled adding approximately 0.5W. UDP / TCP Ethernet and 3.3V TTL serial at 115200 bps carry plain ASCII detection data, including device ID, drone model, frequency, RSSI, timestamp and optional heartbeat. Switchable real-time 2048-point FFT output supports spectrum monitoring, while serial commands configure scan bands, frequency lock, gain from 10–70, antenna mask and IP settings.
For amplitude-based direction finding, GPIO control operates an external SP8T electronic switch to multiplex 8 or 16 antennas and compare RSSI across them. The package contains the TTSK-WT01 module, with protocol documentation provided on order. The 5V DC power supply and external detection antennas matching the target bands must be supplied separately, along with an SP8T switch when direction finding is required. The TTSK-WT01 performs RF detection only and does not jam or take over drones.


