Product overview
The Tatusky TTSK‑TZ‑KPGAN‑30W provides GaN-based RF amplification for integration into anti-drone systems, covering 300–6300 MHz. Its maximum output specification is 30–50W, with typical operation identified as 30W at ≤4.7A. Typical amplifier efficiency is 25% at 30W output. Maximum power gain is 38 dB, while small-signal gain is specified separately at 45–50 dB, with gain flatness of ≤7 dB. The standard RF input is +7 dBm; the maximum non-damaging input must not exceed 13 dBm. This is an amplifier module intended for system integration.
The module measures 130 × 62.9 × 24.5 mm and weighs 360 g. Screw-fixed installation uses a 125.3*57.7 mm mounting-hole specification for M3.0*4 steel screws. Integration must accommodate bottom-mounted heat sinking with forced-air cooling or a conductive heat sink. RF input and output use SMA-Female connectors, with connector customization available. Electrical operation requires DC 24–32V, typically 28V; a supply delivering at least 6.5A at 28V DC is required for 30W continuous-wave output. PA enable uses a 3.3–5V high signal for ON and a low signal for OFF. Operating ambient temperature is −30°C to +55°C.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | Tatusky TTSK‑TZ‑KPGAN‑30W |
| Product type | GaN-based RF power amplifier module |
| Intended application | RF amplification for anti-drone systems |
| Frequency band designation | 30W 300-6300MHZ |
| Frequency range | 300–6300 MHz |
| Operating voltage | DC 24–32VTypical value: 28V. |
| Maximum output power | 30–50WTypical 30W at ≤4.7A. |
| Typical amplifier efficiency | 25%At 30W output. |
| Maximum power gain | 38 dB |
| Small-signal gain | 45–50 dB |
| Gain flatness | ≤7 dB |
| Standard input power | +7 dBm |
| Maximum non-damaging input power | ≤13 dBm; must not be exceeded |
| Input and output port VSWR | ≤2.5Measured under a no-power network test. |
| Operating ambient temperature | −30°C to +55°C |
| Power stability | ±1.5 dBAt −30°C to +55°C. |
| Power supply requirement | ≥6.5A at 28V DCFor 30W continuous-wave output. |
| PA enable control | High-level ON / Low-level OFFHigh-level control voltage: 3.3–5V. |
| RF input and output connectors | SMA-FemaleCustomizable connectors available. |
| Dimensions | 130 × 62.9 × 24.5 mm |
| Weight | 360 g |
| Mounting hole size | 125.3*57.7 mmFor M3.0*4 steel screws. |
| Cooling requirement | Bottom-mount heat sinkForced air cooling or conductive heat sink. |
| Mounting method | Screw-fixed installation |
| Frequency and power customization | Available |
| Minimum order quantity | 1 PCS |
| Warranty | 1 year |
| Application | RF amplification for anti-drone systems |
| Customization options | Logo, frequency, power and packing |
