ChinaDrone.Request a quote ↗
COMPONENT

Tatusky TTSK-TZ-KPGAN-15W

By Tatusky Technology Co., Ltd ↗

The Tatusky TTSK-TZ-KPGAN-15W is a GaN interference amplifier power module covering 300-6000MHz with 10-15W output. Its metal package uses screw-fixed mounting, SMA RF connections and a bottom-mounted heat sink. Integration requires forced air cooling or a conductive heat sink, with a customizable RF connector option.

Get a free sourcing quote for Tatusky TTSK-TZ-KPGAN-15W

Tatusky TTSK-TZ-KPGAN-15W amplifier module in a silver metal enclosure with RF connectors and wires
Tatusky TTSK-TZ-KPGAN-15W amplifier module in a silver metal enclosure with RF connectors and wires
ManufacturerTatusky Technology Co., Limited
ModelTTSK-TZ-KPGAN-15W
Product typeInterference amplifier power module
Frequency range300-6000MHz
Output power10-15W
Amplifier technologyGaN technology with high efficiency, high temperature tolerance and high voltage resistance

Product overview

The Tatusky TTSK-TZ-KPGAN-15W is a wideband interference amplifier power module with a specified frequency range of 300-6000MHz and output power of 10-15W. Its GaN technology combines high efficiency with high temperature tolerance and high voltage resistance. A highly linear design and low distortion are further stated characteristics. The product takes the form of a metal module, with its physical configuration centered on RF connections, screw-fixed mounting and a bottom-mounted heat sink.

For integration, the module provides an SMA input and an SMA output, with a customizable RF connector option. Screw-fixed installation defines the mounting approach, while the bottom-mounted heat sink establishes the cooling layout. The cooling requirement calls for forced air cooling or a conductive heat sink, making thermal provision a concrete installation requirement. Procurement configuration therefore centers on the RF connector choice and cooling arrangement alongside the specified 300-6000MHz frequency range and 10-15W output power.

Specifications

SpecificationValue & conditions
ManufacturerTatusky Technology Co., Limited
ModelTTSK-TZ-KPGAN-15W
Product typeInterference amplifier power module
Frequency range300-6000MHz
Output power10-15W
Amplifier technologyGaN technology with high efficiency, high temperature tolerance and high voltage resistance
Linearity and distortionHighly linear design, low distortion
Package typeMetal module
Cooling methodBottom-mounted heat sink
RF connectorsSMA input; SMA output or customizable RF connector
Cooling requirementForced air cooling or conductive heat sink
Mounting methodScrew-fixed installation

Ask for the Tatusky TTSK-TZ-KPGAN-15W price ↑

More datalinks, video & radio from Chinese manufacturers →
RadioLink R6DSM receiver with antenna wire and connector pins
Component

RadioLink R6DSM

RadioLink

The RadioLink R6DSM is a ten-channel miniature racing-drone receiver measuring 15 × 13 mm and weighing 1.5 g. It combines simultaneous SBUS and PPM outputs, real-time RSSI telemetry and a 600 m airborne control distance. Operating from 3–6 V, it is supplied as one receiver with a packaging bag.

EMAX Mini Magnum 2.5 F4 BLHELI32 35amp 6S MMCX electronics stack
Component

EMAX Mini Magnum 2.5 - F4 BLHELI32 35amp 6S MMCX

By EMAX

The EMAX Mini Magnum 2.5 - F4 BLHELI32 35amp 6S MMCX is an FPV replacement electronics stack with an F4-class processor, 35A ESC rating and 6S-capable input. Its ESC-to-VTX component height is 22mm, and the new batch adds UART pads for receiver setups and third-party applications.

RadioMaster ER6 2.4GHz ELRS PWM receiver with black housing and exposed connector pins
Component

RadioMaster ER6 2.4GHz ELRS PWM Receiver

By RadioMaster

The RadioMaster ER6 2.4GHz ELRS PWM Receiver supports up to six servos, CRSF/Sbus serial outputs and automatic receiver or battery voltage telemetry. It combines a one-piece molded housing with dual antennas, pre-installed ExpressLRS 3.3.0 and supplied connection wires. Electrical integration requires a DC 4.5 - 8.4V receiver supply.

GEPRC GEP-TAKER F411-12A-E 1~2S AIO flight control board with gold solder pads
Component

GEP-TAKER F411-12A-E 1~2S AIO

By GEPRC

The GEPRC GEP-TAKER F411-12A-E 1~2S AIO is a compact flight control assembly for small Whoop and toothpick aircraft. It integrates an STM32F411 controller, ESC and ELRS2.4G 3.0 receiver in a 4.2g board. Supplied with a cable set, it supports LiPo/LiHv 1S-2S power and specifies 12A continuous ESC current.

Kimpok TX5813 FPV video transmitter module with blue circuit board and labeled solder pads
Component

Kimpok TX5813

Kimpok

The Kimpok TX5813 is a compact 5.8GHz analog FPV video transmitter module for small drones and replacement installations. It combines 96 independently adjustable channels with 10dBm~20dBm RF output, a DC 5V supply and a U.FL/IPEX antenna interface in a 22×19×3mm, 2.5g package.

KEEP EXPLORING

Similar products

Browse all products ↗
XK-F202THS video transmitter in a black enclosure with a top ventilation grille and front connectors.
Links & controllers

Xingkai XK-F202THS

Xingkai

The Xingkai XK-F202THS is a compact COFDM wireless HD video transmitter for integration with UAVs, robots and other equipment. It combines H.265 compression, AES encryption, HDMI/SDI inputs and RS232 interfaces. Procurement planning should account for configuration-dependent link figures, separately listed controller dimensions, unspecified package contents and an inconsistent published frequency unit.