ChinaDroneRequest a quote →

Integrated Drone Detection & Decoding Module

The Tatusky Technology Co., Ltd Integrated Drone Detection & Decoding Module combines wideband RF monitoring, direction finding and protocol-level decoding for counter-UAS operations. Compact, low-power hardware provides on-device signal processing, DJI decoding capabilities and Remote ID compliance, with interfaces for integration into monitoring and command systems.

TatuskyDrone detector
Applications
Military and tactical units; law enforcement and public security; airports and restricted airspace; energy infrastructure protection; border and urban UAV monitoring

Get a free quote

Product overview

The Tatusky Technology Co., Ltd Integrated Drone Detection & Decoding Module, item 03185may, combines detection and decoding in a compact, low-power hardware architecture. Its wideband receiver covers 70 MHz – 6 GHz and detects DJI, Autel, FPV, LoRa, modified LTE and UAV datalinks, with wideband drone detection reaching up to 10 km. Real-time FFT spectrum analysis and fully on-device signal processing support RF monitoring, while amplitude-based direction finding uses 8 or 16 antennas with GPIO-controlled switching to estimate target direction.

For DJI O3, the module decodes drone ID, pilot location, home point and serial number; DJI O4 encrypted data has server-side decoding support. Remote ID compliance covers GB42590-2023 / ASTM F3411-22a, and detection in drone and pilot decoding applications reaches up to 20 km with an LNA. UDP, TCP and TTL outputs, with TTL specified at 3.3V, 115200, connect to tablets, rugged terminals, laptops or C2 systems. The module supports integration into counter-UAS platforms for tactical operations, public security, restricted airspace, energy infrastructure protection, and border or urban UAV monitoring.

Cameras & sensors

Specifications

Integrated Drone Detection & Decoding Module specifications
SpecificationValue & conditions
ProductIntegrated Drone Detection & Decoding Module
Item number03185may
System architectureWideband RF monitoring, direction finding and protocol-level decoding
Frequency coverage70 MHz – 6 GHz
Detected signalsDJI, Autel, FPV, LoRa, modified LTE, and UAV datalinks
Detection rangeUp to 10 kmWideband drone detection.
Spectrum analysisReal-time spectrum analysis (FFT)
Signal processingFully on-device
Direction findingAmplitude-based DFUsing 8 or 16 antennas.
Antenna switchingGPIO-controlled
Direction estimationTarget direction estimation for tactical awareness
Decoded informationDrone ID, pilot location, home point, serial numberDJI O3.
Encrypted data decodingEncrypted data with server-side decoding supportDJI O4.
Remote ID complianceGB42590-2023 / ASTM F3411-22a
Detection range with LNAUp to 20 kmDrone and pilot decoding with LNA.
Output interfacesUDP / TCP / TTLTTL: 3.3V, 115200.
Compatible host systemsTablets, rugged terminals, laptops, or C2 systems
Platform integrationIntegration into existing counter-UAS platforms
Hardware designCompact, low-power hardware
DeploymentOEM-friendly and scalable
ApplicationsMilitary and tactical units; law enforcement and public security; airports and restricted airspace; energy infrastructure protection; border and urban UAV monitoring