Product overview
The TABEBUIA T210 combines an AD9361 RF transceiver with a programmable Artix-7 FPGA, offered in 100T and 200T configurations. Its two transmitters and two receivers support coherent 2×2 MIMO and full-duplex communication across 70 MHz–6 GHz, with up to 56 MHz of instantaneous real-time bandwidth. The hardware weighs 0.7 kg and measures 17.5 × 10 × 1.7 cm, providing concrete space and weight requirements for equipment integration. GPIO and JTAG provide additional development and debugging access.
USB 3.0 connects the T210 to a host computer, with UHD, C/C++ and Python interfaces supporting software integration. Power options include USB and an independent 6–12 V supply; the DC specification separately lists 6 V. Multiple units can share an external 10 MHz reference or use GPS synchronization, with a common clock source required for synchronized operation. Host resources constrain demanding processing: USB hubs can reduce available bandwidth, while complex signal processing requires sufficient CPU performance and memory.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | TABEBUIA T210 general-purpose software-defined radio |
| RF transceiver | AD9361; two transmit and two receive channels; 70 MHz–6 GHz |
| Maximum real-time bandwidth | Up to 56 MHz |
| FPGA configurations | Programmable Artix-7 FPGA, available in 100T or 200T configurations |
| Host interface | USB 3.0 |
| Software interfaces | UHD, C/C++ and Python |
| Development interfaces | General-purpose GPIO and JTAG debugging |
| Power options | USB or independent 6–12 V supply |
| DC input voltage specification | 6V |
| TCXO accuracy | Less than 1ppbGPS locked. |
| ADC sampling rate | 61.44 BPAMaximum. |
| Single-sideband image / LO rejection | -40/-50DBCAt 1 GHz. |
| ADC resolution | 12 bits |
| Phase noise | -102DBC/HZ@10KHzAt 1 GHz; 10 kHz offset. |
| ADC wideband SFDR | 78DBC |
| Phase noise | -91DBC/HZ@10KHzAt 5 GHz; 10 kHz offset. |
| DAC sampling rate | 61.44 BPA |
| Output power | 16dbm |
| DAC resolution | 12 bits |
| RF specification with unidentified parameter | -20dbm |
| Maximum host transfer rate | 61.44 BPA16-bit host transfer. |
| Noise figure | Less than 8.5dB |
| Local oscillator accuracy | ± 2.0ppm |
| TCXO accuracy | ± 75ppbGPS unlocked. |
| Weight | 0.7kg |
| Dimensions | 17.5*10*1.7cm |
| Multiple-device synchronization | External 10 MHz reference clock or GPS synchronization across multiple T210 devicesDevices use the same clock source. |
| MIMO architecture | Coherent 2×2 MIMO; two transmitters and two receivers; full-duplex operation |
| External timing inputs | External reference or PPS input for a high-precision GPSDOCustomizable GPSDO configuration. |
| Host integration limitations | USB hubs can affect bandwidth; direct USB 3.0 connection and sufficient host CPU performance and memory are required for demanding signal processing.USB hub connection or limited host processing resources. |
