Product overview
The T-MOTOR VL1032 is a VTOL UAV motor intended for quad aircraft with a recommended maximum takeoff weight of 50–55kg. Its propulsion configuration combines the KV180 motor, V200A ESC and G30 propeller. Electronic propeller locking supports a custom stopping angle through 360° for fixed-wing aerodynamic integration. The ESC automatically varies current to adjust holding torque as external force changes, reducing the power consumption and heat associated with propeller locking. This is propulsion hardware for integration into an aircraft.
The motor has a Φ109.6*56mm body, 150mm enameled-wire leads and a weight of 1090g including cable. Its architecture combines a 24N28P configuration, imported 6901 bearings and centrifugal cooling, with IPX5 protection. Rated operation is 12S LiPo, maximum thrust is 31.7kg, and the 3500W continuous-power rating carries a 180s duration. The ambient temperature range is -30℃～55℃. The V200A provides PWM/CAN control and DRONE CAN/UAV CAN protocols; its 220A peak rating applies for 10s, and both that rating and its 120A continuous rating depend on certain heat dissipation conditions.
Specifications
| Specification | Value & conditions |
|---|---|
| Motor model | VL1032 |
| Magnet level | 180℃ |
| Motor size | Φ109.6*56mm |
| Motor lead cable | Enameled wire 150mm |
| Motor configuration | 24N28P |
| Coil insulation test | 1000V/5s |
| Shaft diameter | IN: 12 OUT: 10 |
| Rotor dynamic balance standard | ≤15mg |
| Bearing | Imported 6901 |
| Ingress protection | IPX5 |
| Centrifugal cooling design | YES |
| Package size | 190*140*80mm |
| Motor KV (RPM/V) | 180 |
| Rated voltage | 12SLiPo battery. |
| Idle current | 4.6A15V. |
| Internal resistance | 6.5mΩ25℃. |
| Motor peak current | 200A |
| Continuous power | 3500W180s duration. |
| Ambient temperature | -30℃～55℃ |
| Maximum thrust | 31.7kg |
| Motor weight | 1090gIncluding cable. |
| ESC model | V200A |
| ESC control | PWM/CAN |
| ESC maximum voltage | 60V |
| ESC protocol | DRONE CAN/UAV CAN |
| Throttle response speed | 300ms |
| ESC weight | 495±10gIncluding cables. |
| Propeller model and dimensions | G30*10.5 inch (762*266.7mm) |
| Propeller weight | 97±5gSingle blade. |
| Chart temperature measurement | Bell temperature after running at 75% throttle on 44.4V for 10mins.75% throttle, 44.4V, 10mins. |
Request a quote for VL1032
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
