ChinaDrone.Request a quote ↗
COMPONENT

U12Ⅱ Efficiency Multirotor UAV Motor KV120

By T-MOTOR ↗

The T-MOTOR U12Ⅱ Efficiency Multirotor UAV Motor KV120 is a heavy-lift brushless propulsion component with 20kg maximum thrust. Weighing 778g including cable, it combines dustproof and waterproof construction with a 36N42P configuration and a 10-14S LiPo rating. Supply includes one KV120 motor and one hardware pack.

Request a quote ↗
Manufacturer and modelT-MOTOR U12Ⅱ Efficiency Multirotor UAV Motor KV120
Product type and purposeBrushless motor for heavy-lift drones
Test itemKV120
Weight778gIncluding cable; KV120 configuration.
Motor dimensionsΦ106.8*47.6 mm
Internal resistance22mΩKV120 configuration.

Product overview

The T-MOTOR U12Ⅱ Efficiency Multirotor UAV Motor KV120 is a brushless propulsion component for heavy-lift multirotors used in surveillance, cruise, security, surveying and mapping. Its architecture combines a new iron core design, curved magnets with controlled spacing, large bearings and a dust protection network. Industrial-grade waterproof and dustproof construction accompanies low-noise operation. Maximum thrust is 20kg. Motor service life is 1500 flights at 40 minutes per flight, with an MTBF of about 1000 hours. The supplied configuration consists of one KV120 motor and one hardware pack.

Integration requires room for a Φ106.8*47.6 mm motor, a 15mm shaft and 90mm enameled-wire leads. The motor weighs 778g including cable and uses a 36N42P configuration with 22mΩ internal resistance. Its KV120 electrical specification calls for a 10-14S LiPo supply. Idle current is 1.5A at 18V, while the 95A peak-current rating carries a 180-second condition. Maximum continuous power is 1080W. These dimensions, connection details and electrical limits define the component requirements for incorporating the supplied motor into a multirotor propulsion system.

Specifications

SpecificationValue & conditions
Manufacturer and modelT-MOTOR U12Ⅱ Efficiency Multirotor UAV Motor KV120
Product type and purposeBrushless motor for heavy-lift drones
Test itemKV120
Weight778gIncluding cable; KV120 configuration.
Motor dimensionsΦ106.8*47.6 mm
Internal resistance22mΩKV120 configuration.
LeadEnameled Wire 90mm
Motor configuration36N42P
Shaft diameter15mm
Rated voltage10-14SLiPo battery; KV120 configuration.
Idle current1.5A18V; KV120 configuration.
Peak current95A180s; KV120 configuration.
Maximum continuous power1080WKV120 configuration.
Maximum thrust20kg
Motor service life1500 flights40mins/flight.
MTBFAbout 1000hours
Construction featuresNew iron core design, motor protection and dust protection network
Environmental and mechanical featuresIndustrial grade, waterproof, dustproof, low noise and large bearings
Magnet architectureCurved magnets with controlled tolerances and spacing
Supplied configuration1× KV120 motor and 1× hardware pack
Application areasSurveillance, cruise, security and protection, surveying and mapping
SOURCE WITH CHINADRONE

Request a quote for U12Ⅱ Efficiency Multirotor UAV Motor KV120

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC SPEEDX2 3110 900KV/1250KV motor with black housing, red trim and threaded shaft
Motors & ESCs

GEPRC SPEEDX2 3110 900KV/1250KV Motor

By GEPRC

The GEPRC SPEEDX2 3110 900KV/1250KV Motor is a propulsion component for 7–10 inch long range FPV drones and 7 inch X8 models. Both versions use a 7075-T6 aluminum rotor and 6S LiPo power, with different lead lengths and electrical limits. Each package supplies one motor with mounting screws and an anti-slip nut.

Scorpion HKIII-4035 Shaft (6mm 20mm) kit with shaft, retaining rings and screws
Motors & ESCs

HKIII-4035 Shaft (6mm 20mm)

By Scorpion

The Scorpion HKIII-4035 Shaft (6mm 20mm) is a replacement motor shaft kit custom made for Henseleit TDF use. Its hardened steel shaft combines an 8mm body, a 6mm pinion interface and a 20mm output shaft length. Installation work must account for the motor housing’s press fit.