ChinaDrone.Request a quote ↗
COMPONENT

P26*7.8 Prop-2PCS/PAIR

By T-MOTOR ↗

The T-MOTOR P26*7.8 Prop-2PCS/PAIR supplies two polished carbon-fiber-and-epoxy UAV propellers with an integrated two-blade design. Its specified dimensions are 26*7.8 (660.4*198.1mm), with a single-blade weight of 69g. Motor integration must account for the 18kg thrust limit, optimum rotational speed range, installation adhesive requirement and environmental limits.

Request a quote ↗
Model dimensions26*7.8 (660.4*198.1mm)
Propeller architecture2blades-integrated
Weight69gSingle blade.
MaterialCF+Epoxy
Thrust limitation18kg
Ambient temperature-40℃~65℃

Product overview

The T-MOTOR P26*7.8 Prop-2PCS/PAIR is a UAV propulsion component supplied as a pair of propellers. Its integrated two-blade architecture uses carbon fiber and epoxy with a polished surface. The model dimensions are 26*7.8 (660.4*198.1mm), with a listed single-blade weight of 69g. Integration involves mounting the propellers onto motors; installation requires medium-strength or stronger anaerobic thread-locking adhesive and properly secured accessories. The supplied configuration is a propeller pair, rather than a flight platform or airframe kit.

Propulsion selection must accommodate the 18kg thrust limitation and the optimum speed range of 1900~4000 RPM/min. The ambient temperature range is -40°C to 65°C. Storage specifications give -10°C to 50°C at less than 85% humidity, while the handling instructions recommend 0°C to 40°C at less than 80% humidity and protection from hostile chemical environments. Inspect the propellers before each flight and replace faulty units. Spinning propellers can cause serious injury, and the blades must not be bent by hand to assess their strength.

Specifications

SpecificationValue & conditions
Model dimensions26*7.8 (660.4*198.1mm)
Propeller architecture2blades-integrated
Weight69gSingle blade.
MaterialCF+Epoxy
Thrust limitation18kg
Ambient temperature-40℃~65℃
Optimum rotational speed1900~4000 RPM/min
Storage temperature and humidity-10℃~50℃/less than 85%Storage.
Surface treatmentPolished
Supplied configurationTwo propellers per pair.
Thread-locking requirementApply medium-strength or stronger anaerobic thread-locking adhesive.When installing propellers onto motors.
Recommended storage temperature and humidity0–40°C at less than 80% humidity.Recommended storage environment.
Inspection and replacementInspect propeller condition and replace any faulty propeller.Before flight.
Environmental exclusionsKeep away from hostile environments, including H₂O, SO₂, NO₂, Cl₂, organosilicon, cyano groups and phenol.Storage.
SOURCE WITH CHINADRONE

Request a quote for P26*7.8 Prop-2PCS/PAIR

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC TAKER F405 BLS 100A 8S STACK flight controller and ESC assembly
Flight control & navigation

GEPRC TAKER F405 BLS 100A 8S STACK

By GEPRC

The GEPRC TAKER F405 BLS 100A 8S STACK is a UAV electronics assembly pairing an F405 flight controller with a 100A four-in-one ESC. It supports 3-8S LiPo input, direct DJI Air Unit connection and dual BEC outputs. The stack configuration includes wiring and mounting hardware, with separate FC and ESC options also listed.

GEPRC TAKER F405 BLS 80A 8S STACK flight controller and ESC assembly with white connectors and USB-C port
Flight control & navigation

GEPRC TAKER F405 BLS 80A 8S STACK

By GEPRC

The GEPRC TAKER F405 BLS 80A 8S STACK is a UAV electronics assembly pairing an F405 flight controller with an 80A four-in-one ESC. It supports 3-8S LiPo power, direct DJI Air Unit connection and 30.5×30.5mm mounting. The stack package includes connection cables, a filter board, battery wiring and mounting hardware.