ChinaDrone.Request a quote ↗
COMPONENT

MN605-S IP45 Multirotor Fixed Wing UAV Motor KV320 2PCS/SET

By T-MOTOR ↗

The T-MOTOR MN605-S IP45 Multirotor Fixed Wing UAV Motor KV320 2PCS/SET provides propulsion for multirotor, VTOL and fixed-wing aircraft. Its KV320 configuration uses a 6S LiPo supply and centrifugal cooling, with recommended 20–22-inch propellers. Each motor weighs 350g including cable; peak current and maximum power carry 180-second limits.

Request a quote ↗
Supplied configurationKV320 motor set; 2PCS/SET
Motor dimensionsΦ68.8*34.9mm
Configuration24N28P
Centrifugal cooling designYES
Shaft diameterIN: 6mm, OUT: 6mm
Rotor dynamic balance standard≤5Mg

Product overview

The T-MOTOR MN605-S KV320 is a propulsion motor for multirotor, VTOL and fixed-wing UAVs, with intended applications including aerial photography, cargo drones, tethered operation, mapping and inspection. Its physical architecture combines a 24N28P configuration, centrifugal cooling and imported 626ZZ bearings. Integration requires space for a Φ68.8*34.9mm motor, with 6mm inner and outer shaft diameters and a 14AWG*150mm lead cable. Each motor weighs 350g including its cable. The IP45 rating accompanies magnets rated for 150℃ temperature resistance and Level H copper wire rated for 220℃.

The selected KV320 configuration is rated for a 6S LiPo battery, with a recommended FLAME 70A 6S ESC and 20–22-inch propeller. Idle current is 2.2A at 17V; the 55A peak-current and 1400W maximum-power ratings each apply for 180 seconds. The product is designated as a two-motor set, with a package weight of 960g. Its packing list separately identifies one MN601 KV320 motor and one hardware pack, so the stated contents conflict with the set designation. This is a motor component set for aircraft integration.

Specifications

SpecificationValue & conditions
Supplied configurationKV320 motor set; 2PCS/SET
Motor dimensionsΦ68.8*34.9mm
Configuration24N28P
Centrifugal cooling designYES
Shaft diameterIN: 6mm, OUT: 6mm
Rotor dynamic balance standard≤5Mg
BearingImported 626ZZ
Motor dynamic balance standard≤10Mg
Magnet temperature resistance150℃ high temperature resistance
Ingress protectionIP45
Lead cable14AWG*150mm
KV320KV320 configuration.
Rated voltage6SKV320 configuration; LiPo battery.
Idle current2.2AKV320 configuration; 17V.
Recommended ESCFLAME 70A 6SKV320 configuration.
Peak current55AKV320 configuration; 180s.
Recommended propeller size20-22"KV320 configuration.
Maximum power1400WKV320 configuration; 180s.
Motor weight350gIncluding cable.
Internal resistance21mΩKV320 configuration.
Package weight960gKV320 configuration; 2PCS/SET.
MTBFAbout 1000hours
Copper wire temperature resistance220 ℃; Level H
Stator constructionImported silicon steel sheet; anti-rust treatment; 180°C high-temperature-resistant coatings
Coil insulation test500V
SOURCE WITH CHINADRONE

Request a quote for MN605-S IP45 Multirotor Fixed Wing UAV Motor KV320 2PCS/SET

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
HOBBYWING Platinum 60A V4 electronic speed controller with black finned housing and attached wires
Motors & ESCs

HOBBYWING Platinum 60A V4

By HOBBYWING

The HOBBYWING Platinum 60A V4 is a brushless electronic speed controller for 450-480 class helicopters with 325-360mm main blades. Rated at 60A continuous and 80A peak with 3-6S LiPo input, it integrates adjustable motor governing, a 5-8V switch-mode BEC, four brake modes and external programming support in a 49g package.