ChinaDroneRequest a quote →

SkyMEMS DMA08

The SkyMEMS DMA08 is a low cost three-axis digital MEMS accelerometer for motor, vibration and structural health monitoring. It combines a ±8g measurement range with digital filtering and compensation in a compact aluminum housing. RS232 communication, optional RS485 Modbus and a 5~30VDC supply support its use in measurement systems.

SkyMEMSPayloads & thermal cameras
Resolution
0.5mg
Applications
Motor monitoring, vibration monitoring, vibration and shock test platforms, and structural health monitoring
Weight
Less than 23grams
Dimensions
50 x 36 x 16 mm

Get a free quote

Product overview

The SkyMEMS DMA08 is a low cost three-axis digital MEMS accelerometer for motor monitoring, vibration monitoring, vibration and shock test platforms, and structural health monitoring. It measures acceleration across the X, Y and Z axes over a ±8g range, with 0.5mg resolution and non-linearity of ≤ 0.2%FS. Its digital measurement chain combines signal processing, A/D conversion and digital filtering with temperature compensation and installation error compensation to produce three-axis acceleration data.

Built with an aluminum housing finished by black oxidation, the fully calibrated DMA08 measures 50 x 36 x 16mm and weighs less than 23grams. It accepts a 5~30VDC supply, consumes less than 3W and operates from -40 to +85°C. Communication uses RS232, with RS485 Modbus available as an option. Output frequency is settable from 2~200Hz. Measurement bandwidth is 684Hz on the X and Y axes and 353Hz on the Z axis, supporting vibration measurement across three directions.

Cameras & sensors

Specifications

SkyMEMS DMA08 specifications
SpecificationValue & conditions
ProductSkyMEMS DMA08 low cost 3 axis digital MEMS accelerometer
Measurement range-8g to +8gX, Y and Z axes.
Bias instabilityMinimum 5μg; typical 10μg; maximum 15μg
Resolution0.5mg
Non-linearity≤ 0.2%FS
Cross-axis sensitivityTypical 0.5%FS
Random walkMinimum 0.03m/s/√hr; typical 0.05m/s/√hr; maximum 0.1m/s/√hr
Bandwidth684HzX and Y axes.
Bandwidth353HzZ axis.
Operating temperature-40~+85°C
Storage temperature-55~+100°C
Housing material and finishAluminum with black oxidation finish
Input power supply5~30VDC
Power consumptionLess than 3W
InterfaceRS232; optional RS485 ModbusRS485 Modbus optional.
Output frequency2~200HzSettable output frequency.
Data refreshing rate supportUp to 200Hz; can support 1kHz
Dimensions50 x 36 x 16mm
WeightLess than 23grams
Signal processing and compensationSignal processing, A/D conversion, digital filtering, temperature compensation and installation error compensation; three-axis acceleration data output
ApplicationsMotor monitoring, vibration monitoring, vibration and shock test platforms, and structural health monitoring
CalibrationFully calibrated

Related guides