ChinaDrone.Request a quote ↗
COMPONENT

DMKR 1.2GHz 9CH Analog Video Receiver Board, AV Output

By SHENZHENSHI LANGSHITE Electronics Co., Ltd ↗

The DMKR 1.2GHz 9CH Analog Video Receiver Board is a dual-layer receiver module with AV output for UAV video reception in goggles, portable receivers and ground systems. It offers 9 selectable 1.2GHz channels, -95dBm sensitivity, 7–36V DC input, an SMA antenna connector and IRC Tramp protocol support. It measures 44×27×27mm and weighs 20g without the antenna.

Request a quote ↗
Frequency1.2GHz
Channels9CH
Sensitivity-95dBm
Antenna ConnectorSMA
Input Voltage7–36V DC
Power Consumption(280±40)mA@5VAt 5V

Product overview

The DMKR 1.2GHz 9CH Analog Video Receiver Board is a receiver component, not a flight platform or airframe. It receives analog FPV video in the 1.2GHz band and passes it out through an AV interface. It is built for UAV systems that need steadier reception in difficult RF conditions. Its dual-layer PCB is designed to improve signal stability where interference is higher or transmission distances are longer. It has 9 selectable channels in the band and works with standard analog video transmission systems. It uses FM/PLL demodulation and has a rated sensitivity of -95dBm. The audio subcarriers are at 6.0MHz (AR) and 6.5MHz (AL).

For integration, the board accepts a wide 7–36V DC supply and draws (280±40)mA at 5V. It also has an on-board regulator output rated at 5V 1A. The antenna connects through an SMA connector, with a typical input impedance of 50Ω and a VSWR of 2:1. The video output impedance is 75Ω. The module measures 44×27×27mm and weighs 20g without the antenna. It is meant for goggles, portable receivers and lightweight UAV ground systems. With the IRC Tramp protocol, you can change frequency and power settings remotely through a flight controller or OSD interface. For tight spaces such as FPV goggles, the single-layer version is a smaller and lighter alternative to this dual-layer board.

Specifications

SpecificationValue & conditions
Frequency1.2GHz
Channels9CH
Sensitivity-95dBm
Antenna ConnectorSMA
Input Voltage7–36V DC
Power Consumption(280±40)mA@5VAt 5V
On Board Regulator Output5V 1A RX
VSWR2:1
Input Impedance50Ω, TypTypical value
Video Output Impedance75Ω
Audio Subcarrier Frequency6.0MHz(AR) / 6.5MHz(AL)
Demodulation SystemFM/PLL
Weight20gWithout antenna
Dimensions44×27×27mm
PCB DesignDual-layer PCB
Video OutputAV output
Control ProtocolIRC Tramp (remote frequency and power adjustment via flight controller or OSD)
Integration TargetsGoggles, portable receivers, lightweight UAV ground systems
CompatibilityStandard analog video transmission systems
SOURCE WITH CHINADRONE

Request a quote for DMKR 1.2GHz 9CH Analog Video Receiver Board, AV Output

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
HYUCX LS01 handheld anti-drone jammer with two antennas and a front power indicator.
Links & controllers

HYUCX LS01

By Shenzhen HYUCX Technology Co., Ltd.

The HYUCX LS01 is a portable, multi-band anti-drone jammer with 60Watts RF output, an omnidirectional antenna and a 24V/ 3.2Ah battery. Its 1.2kg aluminum enclosure incorporates active cooling, battery indication and protection monitoring. It offers customizable frequency coverage and a stated operating duration of 20 minutes.

DJI RC remote controller with integrated screen, shown from the front and rear
Links & controllers

DJI RC

By DJI

DJI RC is a UAV remote controller integrating a 5.5-inch touchscreen, control sticks and a 5200 mAh lithium-ion battery. The approximately 390 g unit includes wireless connectivity, satellite navigation and microSD expansion. Integration constraints include no video output interface, aircraft-dependent transmission distances and defined operating and charging temperatures.