ChinaDrone.Request a quote ↗
COMPONENT

HAKRC 4233-K8 8S 50A ESC

By Shenzhen Haike Technology Co., Ltd. ↗

The HAKRC 4233-K8 8S 50A ESC is an electronic speed controller with 2S-8S LiPo input, 50A continuous and 65A peak current ratings. It combines an AT32F421K8U7 processor, an eight-layer PCB with 3-ounce copper, and support for PWM, Oneshot, Multishot and Dshot protocols.

Request a quote ↗
HAKRC 4233-K8 8S 50A ESC circuit board with gold solder pads
HAKRC 4233-K8 8S 50A ESC circuit board with gold solder pads
ProductHAKRC 4233-K8 8S 50A ESC
Size33*14 mm
Product net weight51g
ESC firmwareHAKRC-AT4G-Rev.32.9
Input voltage2S-8S Lipo
Continuous current50A

Product overview

The HAKRC 4233-K8 8S 50A ESC is an electronic speed controller measuring 33*14 mm and weighing 51g net. It accepts a 2S-8S LiPo input and has a continuous current rating of 50A, with a separate peak rating of 65A. Its control electronics use an AT32F421K8U7 main chip operating at up to 120 MHz, alongside high-current MOS components and an FD6288Q three-in-one IC driver. The specified ESC firmware is HAKRC-AT4G-Rev.32.9, and the current ratio is 300.

The board architecture combines eight layers with 3-ounce copper and resin-plugged holes. Its double-pad design uses metallized edging intended to help prevent pads from detaching during use, while Murata capacitors are included in the component configuration. The copper and board construction are intended to reduce heat generation. For control signals, the ESC supports PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300 and Dshot600, providing the explicitly listed protocol choices for its control connection.

Specifications

SpecificationValue & conditions
ProductHAKRC 4233-K8 8S 50A ESC
Size33*14 mm
Product net weight51g
ESC firmwareHAKRC-AT4G-Rev.32.9
Input voltage2S-8S Lipo
Continuous current50A
Peak current65A
Current ratio300
Protocol supportPWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Main control chipAT32F421K8U7
Operating frequencyUp to 120 MHz
Power switching and driverHigh-current MOS with FD6288Q three-in-one IC driver
CapacitorsMurata capacitors
PCB constructionResin-plugged-hole PCB construction
Pad constructionDouble-pad design with metallized edging
PCB layers and copper8-layer board with 3-ounce copper
SOURCE WITH CHINADRONE

Request a quote for HAKRC 4233-K8 8S 50A ESC

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
T-MOTOR MN1130 motor technical drawing showing dimensional views
Motors & ESCs

T-MOTOR MN1130 KV45/KV53

By T-MOTOR

The T-MOTOR MN1130 KV45/KV53 is a heavy-lift multirotor propulsion motor offered in two KV configurations for 24S LiPo systems. Its integration envelope combines a Φ120.5*65.9mm body, 12mm shaft and 150mm leads. Recommended ESC and propeller combinations differ by variant, alongside maximum thrust figures of 57.3kg for KV45 and 52.0kg for KV53.

GEPRC TAKER F722 35A 32Bit AIO flight controller and ESC board
Flight control & navigation

GEPRC TAKER F722 35A 32Bit AIO

By GEPRC

The GEPRC TAKER F722 35A 32Bit AIO is a compact flight-controller and ESC electronics assembly for UAV integration. Its 9.3g board combines an STM32F722 processor, SPI inertial sensor, barometer, five UARTs and a dedicated HD VTX connector, with 2–6S LiPo input and 35A continuous current.