ChinaDrone.Request a quote ↗
COMPONENT

IM-6008

By Scorpion ↗

The Scorpion IM-6008-140kv is an electric propulsion motor for multirotor UAVs, intended for 12s operation. It weighs 200g including 20cm of wire and incorporates a 60.0mm stator, 8mm steel shaft and dual NMB bearings. Ratings include 844w continuous power and 7.2kg maximum thrust.

Request a quote ↗
Scorpion IM-6008-140kv motor viewed from the side.
Scorpion IM-6008-140kv motor viewed from the side.
Manufacturer and modelScorpion IM-6008-140kv
Product purposeElectric motor for multirotor UAV propulsion
Motor KV140
Motor weight200gIncluding 20cm wire.
Continuous current19AContinuous operation.
Continuous power844wContinuous operation.

Product overview

The Scorpion IM-6008-140kv provides electric propulsion for multirotor UAVs. Its motor architecture combines a 60.0mm-diameter stator with an 8.0mm stator height and a 24N28P configuration. An ultra-hardened steel shaft has an 8mm diameter, supported by dual imported NMB R-1980KK bearings specified as 8x19x6. The stator specification is 0.2mm, imported. For integration weight accounting, the motor weighs 200g including 20cm of wire, while weight including packaging is 250g. The identified configuration has a motor KV of 140.

The 140kv motor is intended for a 12s configuration, with recommended voltage specified as 44.V - 52.2V. Its continuous electrical ratings are 19A and 844w; peak ratings are 36A and 1600w. Recommended propellers measure 22–23 inches, maximum thrust is 7.2kg (15.84lbs), and recommended thrust per arm is 1.5kg–3.25kg (3.3lbs–7.15lbs). The broader IM-6008 series has separate figures: 21–22-inch propeller sizing, peak thrust up to 6.9kg, and rated thrust of 1.8kg–3.25kg per arm. These series figures accompany the specific 140kv motor ratings.

Specifications

SpecificationValue & conditions
Manufacturer and modelScorpion IM-6008-140kv
Product purposeElectric motor for multirotor UAV propulsion
Motor KV140
Motor weight200gIncluding 20cm wire.
Continuous current19AContinuous operation.
Continuous power844wContinuous operation.
Peak current36APeak rating.
Peak power1600wPeak rating.
Recommended propeller22" - 23"
Maximum thrust7.2kg (15.84lbs)
Recommended thrust per arm1.5kg - 3.25kg (3.3lbs -7.15lbs)Per arm.
Recommended voltage12s (44.V - 52.2V)Recommended 12s configuration.
BearingsDual, imported NMB R-1980KK, 8x19x6
Shaft diameter8mm
Shaft materialUltra-hardened steel
Stator diameter60.0mm
Stator height8.0mm
Stator specifications0.2mm, imported
Motor configuration24N28P
Packaged weight250gIncluding packaging.
Series propeller sizing21" - 22"IM-6008 series.
Series peak thrustUp to 6.9kgIM-6008 series; peak thrust.
Series rated thrust per arm1.8kg - 3.25kgIM-6008 series; rated thrust per arm.
SOURCE WITH CHINADRONE

Request a quote for IM-6008

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
HOBBYWING XRotor 40A 6S BLDC electronic speed controller with attached wires and connectors.
Motors & ESCs

HOBBYWING XRotor 40A 6S BLDC

By HOBBYWING

HOBBYWING’s XRotor 40A 6S BLDC is a brushless ESC for 330/450 Class Multirotors, rated at 40A continuous and 60A peak with 2-6S LiPo input. Four regional configurations differ in output wiring, published dimensions and weight. Integration requires attention to the absence of BEC output, connector provision and supported control features.