ChinaDroneRequest a quote →
Scorpion HKIII-4035 Brushless Motor Kit with rotor housing, stator, shaft, bearings and assembly partsScorpion HKIII-4035 Brushless Motor Kit with rotor housing, stator, shaft, bearings and assembly parts

Scorpion HKIII-4035 Brushless Motor Kit

The Scorpion HKIII-4035 Brushless Motor Kit provides components for building a brushless motor, requiring the builder to supply wire and labor. It includes electro-coated housing components, two shielded ball bearings, a pre-installed 6mm shaft, and curved NdFeB magnets pre-assembled and balanced inside the rotor.

ScorpionDrone motor
Weight
480 g

Get a free quote

Product overview

The Scorpion HKIII-4035 Brushless Motor Kit supplies components for building a brushless motor, with wire and assembly labor provided by the builder. Assembly involves winding and terminating the stator, bonding it to the bearing holder, and installing the bearings. The rotor then fits onto the bearing assembly, and a washer and C-Clip retain the shaft. The curved NdFeB magnets come already assembled and balanced inside the rotor.

Gold electro-coating finishes the rear housing and bearing tube assembly as well as the rotor’s front housing. The flux ring has a black electro-coated finish, while the pre-installed 6mm shaft carries a retaining collar. Two shielded high-speed ball bearings and an aluminum cross style backplate mount with mounting screws are supplied. Box contents also include the stator, end bell, four heat shrink pieces, two C-Clips, one washer and one set screw. The heat shrink covers motor leads and provides strain relief. Weight including packaging is 480g.

Motors & ESCs

Specifications

Scorpion HKIII-4035 Brushless Motor Kit specifications
SpecificationValue & conditions
ProductScorpion HKIII-4035 Brushless Motor Kit
Builder-supplied requirementsWire and assembly labor
Stator assembly requirementsWind and terminate the stator, then glue it in place on the bearing holder.
Bearing and rotor assembly requirementsInstall the bearings in the bearing holder, fit the completed rotor assembly onto the bearing assembly, and secure the shaft with the washer and C-Clip.
Magnet preparationPre-assembled and balancedInside the rotor.
Rear housing and bearing tubeGold electro-coated rear housing/bearing tube assembly
Bearing constructionTwo high-speed shielded ball bearings
Rotor constructionGold electro-coated front housing, black electro-coated flux ring, and pre-installed 6mm motor shaft with retaining collar
MountCross style aluminum backplate mount with mounting screws
Magnet constructionComplete set of curved NdFeB motor magnets
Heat shrink tubing functionCovers motor leads and provides strain relief
Front housing with black rotor1Included in the box.
End bell1Included in the box.
Stator1Included in the box.
Motor shaft1Included in the box.
Motor bearings2Included in the box.
Magnets10Included in the box.
Heat shrink pieces4Included in the box.
C-Clips2Included in the box.
Washer1Included in the box.
Set screw1Included in the box.
Weight480gIncluding packaging.

Related guides