Product overview
The Kpower DHV026 25G Semi-Aluminium Hollow Cup High-Voltage Standard Servo Motor is a digital standard servo for applications including inspection drones, service robots, RC car models and medical equipment. Its architecture combines a coreless motor, metal gearing, a 2BB bearing specification and potentiometer position sensing. The housing uses an aluminum middle section with nylon-reinforced plastic top and bottom cases. The gearing is titanium alloy. Physical integration dimensions are 36.2 × 15.1 × 33.2 mm, with a 25T output spline of 5.88 mm diameter and a specified weight of 28 g (0.99 oz).
The servo operates over a 3.6–7.4 V supply range. At 6.0 V, its stall torque is 6 kg·cm, no-load speed is 0.15 seconds per 60°, and stall current is 2100 mA; these ratings retain their respective load conditions. The configuration specifies 180° travel and PWM control, with customization supported for both. Its protection rating is IP42, also with customization supported, and the operating temperature range is −10 to 50°C. These electrical, motion and environmental specifications define the actuator's operating conditions.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | Kpower DHV026 25G Semi-Aluminium Hollow Cup High-Voltage Standard Servo Motor |
| Servo type | Digital standard servo |
| Applications | Service robots, inspection drones, RC car models and medical equipment |
| Stall torque | 6kg·cm6.0V supply. |
| No-load speed | 0.15sec/60°6.0V supply; no load. |
| Travel angle | 180°Customization supported. |
| Voltage range | 3.6-7.4V |
| Dimensions | 36.2x15.1x33.2mm |
| Weight | 28g (0.99oz) |
| Stall current | 2100 mA6.0V supply; stalled motor. |
| Case material | Plastic + aluminum alloy |
| Case architecture | Aluminum middle case with nylon-reinforced plastic top and bottom cases |
| Gear | Metal |
| Gear alloy | Titanium alloy |
| Output spline | 25T Φ5.88mm |
| Motor | Coreless motor |
| Bearing | 2BB |
| Position sensor | Potentiometer |
| Signal and protocol | PWMCustomization supported. |
| Ingress protection | IP42Customization supported. |
| Operating temperature | -10 to 50°C |
Request a quote for DHV026 25G Semi-Aluminium Hollow Cup High-Voltage Standard Servo Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
