Product overview
The GEPRC GEP-ST16 Frame provides the structural basis for a micro freestyle or racing drone using 1.6 inch propellers. Its 78mm wheelbase combines 1.5mm carbon fiber arms with a 1.0mm top plate, a 1.5mm bottom plate and 1.0mm camera plates. The frame weighs 8.5g including the printed parts. An independent battery compartment allows battery attachment above or below the drone, giving the builder a choice of placement and access for battery replacement.
Integration provisions include separate 16mm x 16mm mounting patterns for the flight controller, ESC and video transmitter. Motor mounts use the 3-M1.4-EQS-Ø6.6 pattern and accommodate 0802 and 0803 motors; camera spacing is 14mm, with 14x14mm nano camera integration described. The supplied configuration is an airframe kit comprising plates, screws, printed parts, a spare screwdriver set, two M12x120mm battery ties and two non-slip mats. Motors, electronics, propellers and a battery are outside that supplied component list.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | GEPRC GEP-ST16 Frame |
| Product configuration | Airframe kit with plates, hardware, printed parts and battery attachment accessories. |
| Intended use | Micro drone frame for freestyle flying and racing. |
| Wheelbase size | 78mm |
| Top plate thickness | 1.0mm |
| Bottom plate thickness | 1.5mm |
| Camera plate thickness | 1.0mm |
| FC mounting holes | 16mm x 16mm |
| ESC mounting holes | 16mm x 16mm |
| VTX mounting holes | 16mmX16mm |
| Motor mounting holes | 3-M1.4-EQS-Ø6.6 |
| Camera spacing | 14mm |
| Propeller size | 1.6 inch |
| Weight | 8.5g (including 3D print)Including 3D print. |
| Arm construction | 1.5mm carbon fiber arm. |
| Motor integration | Mounting holes accommodate 0802 and 0803 motors. |
| Nano camera integration | 14x14mm spacing for nano camera installation. |
| Battery placement | Independent battery compartment supports battery attachment above or below the drone. |
| Supplied components | 1 x 1.0mm top plate; 1 x 1.5mm bottom plate; 2 x 1.0mm camera plate; 1 x screw set; 1 x printed set; 1 x spare screwdriver set; 2 x battery tie M12x120mm; 2 x battery non-slip mat. |
Request a quote for GEPRC GEP-ST16 Frame
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
