ChinaDrone.Request a quote ↗
COMPONENT

Rctimer 3.7g Micro Servo

By RCTimer ↗

The Rctimer 3.7g Micro Servo is a servo component for indoor aircraft and small park flyers. It weighs 3.7g, measures 19.8 × 8.0 × 22.5 mm and operates at 4.8~6V. Its specifications include 0.12/60° speed, 0.7kg/cm torque and no bearing.

Get a free sourcing quote for Rctimer 3.7g Micro Servo

Get a free quote

Product identityRctimer 3.7g Micro Servo
Intended applicationIndoor and small park flyers
Weight3.7g
Voltage4.8~6V
Speed0.12/60°
Torque0.7kg/cm

Product overview

The Rctimer 3.7g Micro Servo is a servo component for indoor aircraft and small park flyers. It weighs 3.7g and measures 19.8 × 8.0 × 22.5 mm, giving its physical envelope for installation within a small aircraft.

The servo operates at 4.8~6V, with a speed specification of 0.12/60° and torque of 0.7kg/cm. Its mechanical configuration has no bearing.

Specifications

SpecificationValue & conditions
Product identityRctimer 3.7g Micro Servo
Intended applicationIndoor and small park flyers
Weight3.7g
Voltage4.8~6V
Speed0.12/60°
Torque0.7kg/cm
Dimensions19.8*8.0*22.5 mm
BearingNo

Ask for the Rctimer 3.7g Micro Servo price ↑

Related guides

More frames & airframes from Chinese manufacturers →
DYS D800-V6 hexacopter airframe with six propellers and landing gear
Component

D800-V6 Motor

By DYS

The DYS D800-V6 is a heavy-lift UAV platform with an 800 mm wheelbase, quick-disconnect construction and retractable landing gear. Its configuration specifies motors, ESCs and carbon-fiber propellers, with 6S LiPo power. Take-off weight ranges from 4–10 kg; the 20-minute hovering figure applies at 7 kg with a 15000 mAh battery.

View details
AXR 8832 MG-D standard servo with black housing, green label and metal output shaft
Component

SV TECH AXR 8832 MG-D Servo

By Zhuhai SV Tech Co., Ltd.

The Zhuhai SV Tech Co., Ltd. AXR 8832 MG-D is a standard PWM servo for RC steering, control surfaces and mechanisms. It combines an iron-core motor, stainless steel gears and two bearings in a 60 g package. Operation spans 4.8–8.4 V, with separate stall and rated torque limits governing load selection.

View details
EMAX ES9055II servo with silver and red housing, output shaft and attached cable
Component

ES9055II High Voltage Magnetic Encoder Servo

By EMAX

The EMAX ES9055II High Voltage Magnetic Encoder Servo is an all-metal, brushed digital actuator for demanding aircraft controls and mechanical assemblies. It combines contactless position feedback, a JR connector and a 23T spline with 6.0–8.4V operation. Voltage-dependent stall torque reaches 35 kgf·cm, and positional control supports 180° or full-range 360° configurations.

View details
GEPRC Tern-LR40 O4 Pro Upgrade Kit with black side plates, red mounts, antenna mount, standoffs and screws
Component

Tern -LR40 O4 Pro Upgrade Kit

By GEPRC

The GEPRC Tern -LR40 O4 Pro Upgrade Kit adapts the Tern LR-40 for DJI O4 Air Unit Pro integration. This mechanical upgrade package uses aerospace-grade 7075 aluminum and includes dedicated mounts, standoffs and screws while preserving the original airframe styling.

View details
KEEP EXPLORING

Similar products

Browse all products ↗
ZHTAERO KEEL MINI 22 drone frame with four landing legs
Propellers & airframes

ZHTAERO Keel Mini Frame

ZHTAERO

The ZHTAERO Keel Mini Frame is a modular UAV airframe for 22–30-inch propellers, built from carbon fiber composites and aviation aluminum. Its ≤ 2 kg structure combines replaceable modules, reserved integration openings, bottom payload space and a symmetrical dual-bay arrangement for quickly replaceable external batteries.

View product →Enquire ↗