ChinaDrone.Request a quote ↗
COMPONENT

RCTIMER 2-Axis Brushless Gimbal Controller & IMU v1.0

By RCTimer ↗

The RCTIMER 2-Axis Brushless Gimbal Controller & IMU v1.0 is an open source electronics package for two-axis brushless gimbal control. It combines an ATMega328P controller, an MPU6050 inertial sensor and connection interfaces, accepts a 2~6-cell LiPo input, and includes a controller, IMU board and 300mm five-pin cable.

Get a free sourcing quote for RCTIMER 2-Axis Brushless Gimbal Controller & IMU v1.0

Get a free quote

Manufacturer and modelRCTIMER 2-Axis Brushless Gimbal Controller & IMU v1.0
Product identifierBGC-Board
Gimbal motor supportTwo-axis brushless motor support; adjustable for balancing.
Project typeOpen source hardware and software project.
MicrocontrollerATMega328P
Debug interfaceOnboard FT232RL for debugging.

Product overview

The RCTIMER 2-Axis Brushless Gimbal Controller & IMU v1.0 is a gimbal electronics package supporting two-axis brushless motors and adjustment for balancing. Its architecture combines an ATMega328P controller with an MPU6050 six-axis gyroscope/accelerometer incorporating a Motion Processing Unit. The controller also carries an FT232RL for debugging and an onboard logic level converter. This is an open source hardware and software project, providing a controller-and-sensor basis for a brushless gimbal assembly.

For installation planning, the stated dimensions are 50mm × 50mm, and the 25g weight includes the IMU board. Electrical integration provisions comprise a 2~6-cell LiPo input, three input channels, a Multiport and a UART port. The supplied configuration consists of one brushless gimbal controller, one IMU board and one 300mm five-pin cable. This package supplies the control electronics and inertial sensing components for the gimbal, with the cable included as a separate connection item.

Specifications

SpecificationValue & conditions
Manufacturer and modelRCTIMER 2-Axis Brushless Gimbal Controller & IMU v1.0
Product identifierBGC-Board
Gimbal motor supportTwo-axis brushless motor support; adjustable for balancing.
Project typeOpen source hardware and software project.
MicrocontrollerATMega328P
Debug interfaceOnboard FT232RL for debugging.
Power input2~6-cell LiPo input.
Input channels3 input channels.
MultiportMultiport.
UART interfaceUART port.
Inertial sensorMPU6050 six-axis gyroscope/accelerometer with Motion Processing Unit.
Logic level conversionOnboard logic level converter.
Dimensions50mm × 50mm.
Weight25g.Includes IMU board.
Controller quantity1 brushless gimbal controller.Supplied package.
IMU board quantity1 IMU board.Supplied package.
Connecting cable1 × 300mm five-pin cable.Supplied package.

Ask for the RCTIMER 2-Axis Brushless Gimbal Controller & IMU v1.0 price ↑

Related guides

More flight controllers & GNSS from Chinese manufacturers →
OneRTK UM982 positioning unit with a white enclosure, front indicator lights and side UART port
Component

ZeroOne OneRTK UM982 Flight Controller

ZeroOne

The ZeroOne Flight OneRTK UM982 is a flight-controller positioning and dual-antenna heading integration unit with CAN and UART connections. Its installation requires at least 30 cm between antennas, correctly configured spatial offsets, and suitable GPS and heading parameters. A serial cable is included among its accessories.

View details
JIYI KX-XF flight controller with orange metal housing and connector ports
Component

JIYI KX-XF Flight Controller

JIYI

The JIYI KX-XF is a flight controller for delta-wing and patrol UAVs, combining hardware and software redundancy with diagnostic algorithms. The controller weighs 321 g and supports SBUS receivers, RTK navigation, remote ground stations and intelligent AI gimbal cameras for inspection, rescue, firefighting and training applications.

View details
GEPRC TAKER F722 BLS 50A STACK flight controller and ESC assembly
Component

GEPRC TAKER F722 BLS 50A STACK

By GEPRC

The GEPRC TAKER F722 BLS 50A STACK is a UAV electronics assembly pairing an F722 flight controller with a four-in-one 50A ESC. Designed for direct DJI Air Unit connection, it provides onboard logging, OSD and 3–6S LiPo operation. It is a component stack for integration into an aircraft, with STACK, FC and ESC configuration options.

View details
ZIYAN CB03 communication base station with cylindrical antenna housing and two side antennas.
Component

ZIYAN CB03 communication base station

By ZIYAN

The ZIYAN CB03 communication base station supports long-distance UAV communications from fixed sites or mobile platforms. It combines automatic directional-antenna tracking, integrated RTK positioning and redundant dual-battery power. This communications accessory supports ZIYAN's mainstream aircraft models and offers USB cellular-network expansion and HDMI output of aircraft gimbal imagery.

View details
Happymodel Crazybee F4 Lite 1s flight controller board with wires, connector and mounting hardware
Component

Happymodel Crazybee F4 Lite 1s

Happymodel

The Happymodel Crazybee F4 Lite 1s is an integrated electronics board for 1S tiny whoop aircraft, combining flight control, four ESCs, a receiver and a 5.8GHz video transmitter. Its 28.5 × 28.5mm footprint accommodates Frsky or Flysky receiver configurations, Betaflight OSD, voltage detection and a 5V 1A BEC.

View details
KEEP EXPLORING

Similar products

Browse all products ↗
YAHREE Q103 three-sensor gimbal camera with black spherical housing and mounting bracket
Mission payloads

YAHREE Q103 Gimbal Camera

By Yahree Aeropower Tech Co., Ltd.

The YAHREE Q103 is an aluminum three-sensor gimbal camera for target acquisition and tracking. It combines 4K visible-light imaging, 10× optical and up to 40× hybrid zoom, and 640*512 thermal imaging. The 820±10 g assembly supports multiple control interfaces, defined three-axis movement ranges and 1920×1080@30fps video output.

View product →Enquire ↗
CZI GL10 V2 gimbal searchlight mounted on a drone
Mission payloads

CZI GL10 V2 Searchlight

CZI

The CZI GL10 V2 is a 130g gimbal searchlight for DJI Mavic 3 Enterprise Series aircraft. It has a 30W optical output and 3200lm luminous flux, and reaches a maximum search distance of ≥100m. It also carries a green laser pointer, a high-frequency strobe, four warning colors and DJI Pilot2 controls.

View product →Enquire ↗
Digital Eagle YPO-20 EO/IR/LRF gimbal camera with black housing and mounting bracket
Mission payloads

Digital Eagle YPO-20 EO/IR/LRF Camera

By Digital Eagle

The Digital Eagle YPO-20 EO/IR/LRF Camera is a three-axis stabilized UAV camera accessory combining 30x visible-light zoom, thermal imaging, automatic tracking and laser range finding. Intended for multi-rotor and fixed-wing mounting, the 1.7kg unit provides HDMI output, visible-light memory-card storage and day/night observation within specified movement and temperature limits.

View product →Enquire ↗