Product overview
The GEPRC TAKER F722 BLS 50A STACK combines a GEP-F722-HD V2 flight controller with a GEP-BLS50A-4IN1 ESC for UAV flight-control and motor-control integration. Its DJI Air Unit connection uses a direct plug, reducing soldering at that interface. The controller brings together an STM32F722 processor, an SPI-connected ICM42688-P IMU, 16M onboard black-box storage and BetaFlight OSD with an AT7456E chip. Five UARTs, a Type-C USB interface and an integrated LC power filter provide further integration provisions.
Physical installation requires room for a 36.85×36.85mm controller and a 42.9×39.7mm ESC, both using a 30.5×30.5mm mounting pattern. Silicone mounting rings reduce the effective hole diameter from 4mm to 3mm. Both boards accept 3–6S LiPo input; the ESC specifies 50A continuous current and 55A for five seconds. The listed stack package supplies both boards, a capacitor, adapter and connection cables, an XT60 power cable and mounting hardware. STACK, FC and ESC are separate configuration choices, so the selected configuration matters when procuring the complete assembly.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | GEPRC TAKER F722 BLS 50A STACK; plug-and-play flight electronics stack designed for DJI Air Unit |
| Configuration options | STACK, FC, ESC |
| Flight controller model | GEP-F722-HD V2 Flight Controller |
| MCU | STM32F722 |
| IMU | ICM42688-P(SPI) |
| Air Unit connection | Direct plugging into DJI Air Unit |
| Black box | 16M onboard |
| USB interface | Type-C |
| OSD | BetaFlight OSD with AT7456E chip |
| BEC output | 5V@3A |
| Flight controller firmware target | GEPRCF722 |
| Flight controller dimensions and mounting | 36.85×36.85mm; mounting pattern 30.5×30.5mm; φ4mm holes become φ3mm with silicone shock-absorbing ringsFlight controller; mounting holes become φ3mm when silicone shock-absorbing rings are used. |
| Flight controller input voltage | 3-6S LiPoFlight controller. |
| UART count | 5 |
| Power filter | Integrated LC filter |
| Flight controller weight | 8.1gFlight controller. |
| ESC model | GEP-BLS50A-4IN1 ESC |
| ESC input voltage | 3-6S LipoESC. |
| Current sensing | SupportedESC. |
| Continuous current | 50AESC. |
| Burst current | 55A (5 seconds)ESC; 5-second burst. |
| Supported protocol | Dshot 150/300/600ESC. |
| ESC dimensions and mounting | 42.9×39.7mm; mounting pattern 30.5×30.5mm; φ4mm holes become φ3mm with silicone shock-absorbing ringsESC; mounting holes become φ3mm when silicone shock-absorbing rings are used. |
| ESC weight | 13.7gESC. |
| ESC target | G_H_30ESC. |
| Included electronics | 1 flight controller, 1 ESC, 1 capacitorListed stack package. |
| Included adapter and power cables | 1 DJI Air Unit adapter cable, 1 flight controller adapter cable, 1 XT60 power cableListed stack package. |
| Included mounting hardware | 4 M3*30 screws, 4 M3*24 screws, 8 nylon nuts, 8 silicone grommetsListed stack package. |
| Included signal cables | 2 SH1.0 4-pin silicone cables, 1 camera connection cableListed stack package. |
Request a quote for GEPRC TAKER F722 BLS 50A STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
