ChinaDroneRequest a quote →

RadioTrack TrackCase_DLW

The RadioTrack TrackCase_DLW is a fixed drone detection unit for permanent monitoring locations. It receives drone image and data transmission signals to deliver alerts, identification, positioning and trajectory tracking. An IP65 aluminum alloy housing, AC 220V or POE power, and serial data output support integration into fixed monitoring systems.

RadioTrackPayloads & thermal cameras
Weight
Approximately 3 kg
Dimensions
280 mm × 220 mm × 75 mm

Get a free quote

Product overview

The RadioTrack TrackCase_DLW is a fixed drone detection unit for ongoing area monitoring at permanent locations. It receives drone image and data transmission signals to provide detection alerts, identification, positioning and trajectory tracking. Supported aircraft include common DJI, Autel, FIMI, Hubsan and Parrot models, alongside FPV and other analog transmission drones. WiFi and enhanced WiFi detection extend coverage to models such as DJI Mini SE and PowerEgg. Detection reaches up to 3km, depending on the drone model and electromagnetic environment.

An aluminum alloy housing with IP65 protection encloses the unit, with natural and forced cooling. Operating temperature is -20°C to +45°C, with a humidity requirement of ≤70%. The device measures 280mm × 220mm × 75mm and weighs approximately 3kg excluding the antenna. Power consumption is approximately 20W, supplied through AC 220V or POE. A 115200-baud serial interface carries real-time data for system integration, while multi-device networking supports wider monitoring installations. Detection operates without transmitting signals or interfering with other devices.

Cameras & sensors

Specifications

RadioTrack TrackCase_DLW specifications
SpecificationValue & conditions
Product typeRadioTrack TrackCase_DLW fixed drone detection unit
Detection functionsReceives drone image or data transmission signals for detection alerts, identification, positioning and trajectory tracking
Supported drone modelsDJI, Autel, FIMI, Hubsan, Parrot and other common models
Analog transmission detectionSupports FPV and other analog transmission drones
WiFi detectionDetects WiFi and enhanced WiFi models, including DJI Mini SE and PowerEgg
MAC identificationUses the MAC address as a unique identifierFor supported niche drone models.
Frequency coverage70M–6GHz
Key monitoring bands433/868/915MHz, 2.4G, 5.2G and 5.8G
Data transmission signal detectionDetects 433/868/915M band data transmission signals, including FrSky, YRRC and 3DRadio module signals
Detection distanceUp to 3kmVaries with drone model and electromagnetic environment.
Detection startupImmediate drone detectionUpon power-on.
Refresh rateUp to 2 seconds/time
Simultaneous detection10+ drones
DJI identification and positioningAircraft body ID, real-time pilot and drone GPS coordinates, and complete drone trajectories; positioning error approximately 5 metersFor supported DJI models.
Remote ID informationReal-time acquisition of serial numbers, GPS positions, speeds and other informationFor models broadcasting Remote ID.
National standard positioning supportSupports positioningFor drones complying with GB 42590-2023.
Power consumptionApproximately 20W
Dimensions280mm × 220mm × 75mm
WeightApproximately 3kgExcluding antenna.
InterfaceSerial port, 115200 baud
Power supplyAC 220V or POE; supports outdoor power supply
Protection ratingIP65
Housing materialAluminum alloy
Cooling methodNatural cooling + forced cooling
Operating temperature-20°C ~ +45°C
Humidity requirement≤70%
Passive detectionNo signal transmission or interference to other devices
Electromagnetic compatibilityComplies with relevant EMC standards
Data processingLocal processing
System integrationStandard serial output, real-time data transmission, multiple protocol interfacing, multi-device networking, control platform access and third-party system compatibility

Related guides