Product overview
The F405 FC from Shenzhen Pakang Technology Co., Ltd. is a flight-controller component for drone builds, with Betaflight, INAV and ArduPilot firmware options. Its hardware combines an STM32F405RGT6 MCU, SPL06-001 barometer, ICM42688P gyro and AT7456E OSD chip, alongside a 16MB blackbox. The controller measures 36mm × 36mm, weighs 8g and uses a 30.5mm × 30.5mm mounting-hole pattern. These dimensions define its installation footprint, while six motor-output channels and four UART channels provide the specified control and peripheral connections.
Integration connections include Type-C USB and dedicated plugs for a receiver, analog camera, analog video transmitter, digital video transmitter and brushless ESC. Digital video support covers DJI, Vista and Caddx, with receiver protocols spanning ELRS, CRSF, S.BUS and the other listed options. Recommended component combinations extend from 5–7 inch freestyle builds to 8–9 inch higher-power builds. Those ESC, frame and motor combinations are matching recommendations, rather than stated package contents; the identified product is the flight controller, with LED-strip and buzzer support.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer | Shenzhen Pakang Technology Co., Ltd. |
| Product | F405 FC — F405 Flight Controller |
| Firmware | Betaflight / INAV / ArduPilot |
| MCU | STM32F405RGT6 |
| Barometer | SPL06-001 |
| Gyro | ICM42688P |
| OSD chip | AT7456E |
| USB port | Type-C |
| Blackbox | 16MB |
| Digital VTX support | DJI / Vista / Caddx |
| Motor output | 6CH |
| LED strip support | Support X4 |
| Weight | 8g |
| Buzzer support | Supported |
| Dimensions | 36mm × 36mm |
| Mounting holes | 30.5mm × 30.5mm |
| UART ports | 4CH |
| Input power | 3.3V/2A, 5V/2.5A, 12V/3A |
| Receiver protocols | ELRS / CRSF / S.BUS / FrSky / Futaba / Sky / TBS Crossfire / DSMX |
| Direct plug ports | Receiver 4P / Analog Camera 3P / Analog VTX 4P / Digital VTX 6P / Brushless ESC 8P |
| Entry freestyle matching configuration | 6S 55A ESC; recommended frame size: 5–7 inch; recommended motor: 2207 series; intended uses: freestyle, cinematic FPV, and general drone builds.Recommended entry freestyle setup. |
| Long-range freestyle matching configuration | 8S 60A ESC; recommended frame size: 7–8 inch; recommended motor: 2807 series; intended uses: long-range FPV, cruising, and GoPro-style builds.Recommended long-range freestyle setup. |
| High-power matching configuration | 8S 70A ESC; recommended frame size: 8–9 inch; recommended motor: 2807 / 3115 series; intended uses: 8–9 inch freestyle, long-range FPV, and stronger power setups.Recommended high-power 9 inch setup. |
