ChinaDrone.Request a quote ↗
COMPONENT

CKESC Breeze 30A-M FOC

By NanChang ChangKong Technology Co.,Ltd ↗

The CKESC Breeze 30A-M FOC from Nanchang ChangKong Technology is a compact UAV electronic speed controller with FOC drive, vfast observer technology and customizable serial control/output. It supports 6~14S operation and a maximum continuous current of 30 A under specific cooling conditions, with integrated motor, thermal, signal-loss and battery protections.

Request a quote ↗
CKESC Breeze 30A-M FOC electronic speed controller with exposed circuit board and attached wires
CKESC Breeze 30A-M FOC electronic speed controller with exposed circuit board and attached wires
ModelCKESC Breeze 30A-M FOC
Product typeUAV electronic speed controller
Rated specification30A, 6~14S
Voltage6~14S
Dimensions50 × 23 × 12.8 mm
Weight30 gIncluding wiring.

Product overview

Nanchang ChangKong Technology’s CKESC Breeze 30A-M FOC is an electronic speed controller for UAV motor control. Its FOC drive uses vfast observer technology, with features including low noise, improved throttle linearity and kinetic energy recovery. The controller measures 50 × 23 × 12.8 mm and weighs 30 g including wiring, providing concrete dimensions and mass for propulsion-system integration. Its electrical specification is 6~14S, with a throttle travel range of 1000~2000 µs. Serial control and output are customizable.

The maximum continuous operating current is 30 A under specific cooling conditions, making heat removal a material integration requirement. Above 120°C, protection gradually reduces maximum output power, potentially to 40% of full-throttle power, and restores it after cooling. Voltage protection inhibits startup outside permitted limits, while startup, current, overload and battery protections constrain operation. Following 500 ms of signal loss, throttle falls below 40% within 3 seconds before declining to shutdown. Stall recovery attempts a restart, but a high-throttle stall may damage the controller.

Specifications

SpecificationValue & conditions
ModelCKESC Breeze 30A-M FOC
Product typeUAV electronic speed controller
Rated specification30A, 6~14S
Voltage6~14S
Dimensions50 × 23 × 12.8 mm
Weight30 gIncluding wiring.
Maximum continuous operating current30 AUnder specific cooling conditions.
Throttle travel range1000~2000 µs
Motor controlFOC drive with an efficient algorithm, good adaptability, high thrust efficiency, low noise and improved throttle linearity.
Observer technologyVfast observer technology
Energy recoveryKinetic energy recovery
Serial interfaceSerial control and outputCustomizable configuration.
Low-voltage protectionPrevents motor startup.Supply voltage below the permitted value.
High-voltage protectionPrevents motor startup.Supply voltage above the permitted value.
Startup protectionLimits starting current and automatically retries startup.Unsuccessful motor startup.
Stall protectionAttempts to restart the motor.Motor stall during normal operation; a stall at high throttle may damage the controller.
Overtemperature protectionGradually reduces maximum output power, potentially down to 40% of full-throttle power; restores original power after temperature falls.Temperature exceeds 120°C.
Overcurrent protectionLimits peak current to prevent it exceeding the limit.
Overload protectionLimits maximum throttle to protect the propulsion system.Excessive motor load detected.
Signal-loss protectionGradually reduces output power, quickly lowers throttle below 40% within 3 seconds, then slowly reduces throttle until shutdown.Control signal lost for 500 ms.
Battery protectionGradually limits output throttle to prevent battery overdischarge.
SOURCE WITH CHINADRONE

Request a quote for CKESC Breeze 30A-M FOC

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Motors & ESCs

Professional LCD Program Box

By HOBBYWING

The HOBBYWING Professional LCD Program Box configures supported ESCs through standalone LCD operation or PC USB connection. It requires 4.8-6V and an additional battery pack when the ESC lacks a built-in BEC. XERUN V3 operation requires a program box software update. Production has stopped; the Multifunction LCD Program Box replaces it.