ChinaDroneRequest a quote →
MoneyPro MDG-200 Radio Altimeter with black rectangular housing, mounting tabs and a connectorMoneyPro MDG-200 Radio Altimeter with black rectangular housing, mounting tabs and a connector

MDG-200 Radio Altimeter

The Moneypro MDG-200 Radio Altimeter is a C-band monopulse radio height-setting device with heterodyne sensing and an RS422 interface. It provides a 30m-60m height setting range with fixed height accuracy of ≤ 2m, delivering height-setting command information and telemetry data when the preset height is reached.

MoneyProPayloads & thermal cameras
Dimensions
150 mm×110 mm×40 mm

Get a free quote

Product overview

The Moneypro MDG-200 Radio Altimeter is a C-band radio height-setting device with a monopulse measurement system. Its construction combines a heterodyne sensitive component with an antenna-terminal circulator using a transceiver common-mode configuration. Powered on before missile launch, it performs a self-check and accepts height settings through its communication interface. After launch, the RF module activates and establishes a gate for the configured height; reaching that height produces height-setting command information and telemetry data.

The MDG-200 provides a height setting range of 30m-60m, a fixed-height binding interval of 1m and fixed height accuracy of ≤ 2m. It operates at 4300 ± 15MHz with transmission power of ≤ 2W. The 150mm×110mm×40mm device requires a +18V ~ 36V supply and draws not more than 0.5A. An RS422 interface communicates at 460800bps. Operating temperature is -40℃~+60℃, storage temperature is -55℃~+65℃, and relative humidity is ≤95%.

Cameras & sensors

Specifications

MDG-200 Radio Altimeter specifications
SpecificationValue & conditions
ProductMoneypro MDG-200 Radio Altimeter
Operating band and measurement systemC-band radio height-setting device with a monopulse working system.
Receiver and antenna-terminal architectureHeterodyne sensitive component and antenna-terminal circulator with a transceiver common-mode configuration.
Self-check and height configurationPerforms a self-check and completes height setting through the communication interface.Before missile launch, with the device powered on.
RF activation and height gateActivates the RF module and sets a gate based on the preconfigured height.After missile launch.
OutputsHeight-setting command information and telemetry data.When the preset height is reached.
Carrier-speed influenceUnaffected by the carrier’s speed.
Working frequency4300 ± 15MHz
Transmission power≤ 2W
Height setting range30m-60m
Dividing interval of fixed height binding1m
Fixed height accuracy≤ 2m
Falling angle-70°~ -90°
Falling speed700m/s
Power supply+18V ~ 36V
Consumption currentNot more than 0.5A
Dimensions150mm×110mm×40mm
Operating temperature-40℃~+60℃
Storage temperature-55℃~+65℃
Relative humidity≤95%
InterfaceRS422 interface
Communication rate460800bps

Related guides