Product overview
The MAD M9C15 IPE V1.0 is a propulsion motor for heavy-lift drones and industrial UAV platforms. Its intended integration combines a 6–8 kg single-axis load with 34–36 inch carbon fiber propellers. The offered winding option is 100KV, with a listed 12S supply configuration. Sustained thrust is specified as 6~8kg, while maximum thrust reaches up to 17.7 kg per axis. These figures distinguish its sustained operating role from its maximum thrust capability.
The physical design combines a 36N42P core, 7075-T6 aluminum construction and a reinforced steel shaft within a D:98.5 × 38.75 mm motor envelope. Integration provisions include two propeller mounting patterns, D:40 M4×4 motor mounting holes and a 100mm black silicone cable. This is a motor component for incorporation into a UAV propulsion system. IP45 protection and separate wire and magnet temperature ratings define relevant component limits. Weight is stated inconsistently as 595g and 600g, leaving an unresolved mass difference for installation planning.
Specifications
| Specification | Value & conditions |
|---|---|
| Motor model | MAD M9C15 IPE V1.0 |
| Sustained thrust | 6~8kg |
| Maximum thrust | Up to 17.7 kg per axisPer axis. |
| Supported voltage configuration | 100KV/12S100KV configuration. |
| Listed weight | 595g |
| KV option | 100KV |
| Intended load | 6–8 kgSingle-axis payload. |
| Intended propellers | 34–36 inch carbon fiber propellers6–8 kg single-axis payloads. |
| Motor core | 36N42P |
| Construction material | 7075-T6 aviation-grade aluminum |
| Shaft construction | Reinforced steel shaft |
| Magnetic optimization | Magnetic flux density and magnetic inclusion simulation |
| Number of pole pairs | 21 |
| Stator treatment | Anticorrosive |
| Varnished wire temperature rating | 180°C |
| Motor size | D:98.5 × 38.75 mm |
| Magnet temperature rating | 150°C |
| Degree of protection | IP45 |
| Cable | 100mm, 14# Awg, black silicone |
| Centrifugal heat dissipation | Yes |
| Rotor balance | ≤5 mg |
| Propeller mounting holes | D:20 M3×4, D:23 M4×4 |
| Motor balance | ≤10 mg |
| Shaft diameter | IN: 15 mm |
| Motor mounting holes | D:40 M4×4 |
| Bearing | 6902*2 |
| Disruptive test voltage | 500 V |
| Description weight | 600g |
Request a quote for M9C15 IPE V1.0 Drone Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
